Analysis of the possibility of estimation slags propriety with use the database
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 2
Abstract
This article contains information concerning the analysis of the possibility of defining refinery qualities of slag based of the thermophysical and thermodynamical data. The isues presented deals not only with refining copper and melting stages, but also the idea of building an optimization program. In its assumption the program is supposed to check and search specific data very quickly on the particular types of slag.
Authors and Affiliations
S. Biernat, A. W. Bydałek
Keywords
Related Articles
- EP ID EP70453
- DOI -
- Views 145
- Downloads 0
The influence of austenitization temperature on the anizothermal eutectoid transformation of spheroidal cast iron
In the work one can find the research of anizothermal eutectoid transformation of unalloyed austenitized spheroidal cast iron in the temperature 875 or 1000oC. By means of the matallographic method one prepered TTT diagr...
Usage of ATND method to determination of mechanical properties of AlMg10 alloy with complex additive of SbNiCr
Aluminum alloys with magnesium are commonly used in foundry industry due to lower density and higher corrosion resistance, comparing with silumins. Complicated shapes of produced alloys, differences in wall thickness and...
New Look at the Process of Reclamation of Moulding Sands
This paper presents a new perspective on the issue of reclamation of moulding and core sands. Taking as a premise that the reclamation process must remain on the surface of grains some not separated binding materials res...
Structure of carbon steels after remelting of the surface layer with the electric arc
This study presents results of a research on the enhancement of properties of the surface layer of carbon steels by treating it with a concentrated heat stream utilizing the GTAW method. Remelting of the surface layer of...
Thermal aspects of temperature transformations in silica sand
Problems related with the choice of moulding sand composition considering its behaviour in contact with molten metal were discussed. The investigations of high-temperature phenomena enable moulding sand composition to be...