Comparison of Epoxy and PTFE Teflon Vortex Tube Process Parameters Using Taguchi Technique
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 3, Issue 11
Abstract
Vortex tube could be a machine that separates propellant into hot and cold streams. once high pressure air enters into the vortex chamber through one or a lot of tangential nozzles, a sturdy vortex flow created that splits into 2 regions. The high temperature air close to the boundary of the tube leaves circumferentially through the round shape valve wherever as the air at lower temperature leaves through the cold portal. A conical valve is adjusted with the hand control knob allows for adjusting the degree and temperature of air popping out from the cold end. there's no maintenance, no mess, no explosion hazard, no electricity, and no moving components in exploitation the vortex tube. Vortex tubes behave in avery certain and manageable manner. the sole disadvantage with the vortex tube is its low constant of performance (COP). The Vortex tube used for experimental work is factory-made exploitation stuff Poly characid Fluoro alkene (PTFE TEFLON RODS) AND EPOXY POLYSTER RODS. AN Experimental work has been administrated to investigate the performance of vortex tube that influences the impact of 5 manageable input variables specifically diameter of the orifices, diameter of the nozzles, length of hot tube, tube diameter and recess pressure over the temperature distinction within the cold facet as output exploitation Taguchi technique. Experiments were conducted at completely different input pressures of air, viz., at 2, four and half-dozen bars and for various diameters of orifices, viz., 5 mm ,6.5mm and 8 mm. The supply for compressed gas input to the vortex tube was reciprocal compressor. the varied Parameters like main impact analysis, analysis of variance (ANOVA) and optimum Cold Temperature were carried out in order to confirm the effects of method parameters and optimum issue settings. Finally, the confirmation check is distributed to verify the accuracy of Taguchi technique.
Authors and Affiliations
Kakarla Venkateswarlu
Keywords
Related Articles
- EP ID EP106078
- DOI -
- Views 67
- Downloads 0
TRADITIONAL INDIAN PAINTING RETRIEVAL SYSTEM BASED ON CURVELET TRANSFORM AND COMPARISON THE RESULT USING GABOR FILTER
Today the technology in which relevant images from a large databases are searched according to the user’s interest is famous by the name of Content based Image Retrieval or CBIR. Since last two decades it has become an a...
A GENETIC ALGORITHM FOR PERFORMANCE OPTIMIZATION OF A STOCHASTIC FLOW NETWORK WITH COST ATTRIBUTE IN TERMS OF MINIMAL CUTS
The paper presents a genetic algorithm to generate minimal cuts for a stochastic flow network with cost attribute to evaluate the performance index a stochastic- flow network in which each arc has several capaciti...
INSIDE RECOMMENDATION SYSTEM: SURVEY, RESEARCH AREA
With the increase in E-commerce, Recommendation Systems are getting popular to provide recommendations of various items (movies, books, music) to users. To build the Recommendation System(RS), Collaborative Filter...
AIR MOTION DETECTOR
The objective of this project is to develop air motion detector working based on piezo element sensor. The project described here is the air motion detector can be warm against strong winds There are many popular electr...
Adsorption Studies of Arsenic Removal on Activated Carbon Derived From Delonix Regia (Gulmohar Sees Pods)
Arsenic content in groundwater imposes a great threat to people worldwide. As (III) which is toxic element and creates adverse effect to the human health .The present study deals with removal of arsenic from aqueo...