DETERMINATION OF TECHNOLOGICAL SURFACES IN GASEOUS NUCLEAR POWDER WITH A MOBIUS HYDROFAST SHEET
Journal Title: Международный научный журнал "Интернаука" - Year 2018, Vol 1, Issue 2
Abstract
It is proposed to improve the technical implementation of the design of the muffler of the noise of the gas jet. The analysis of constructive solutions of noise suppressors is carried out and a new technical solution is proposed to improve the noise-absorbing noise of various pneumatic systems when emitting exhaust gas jets into the environment.
Authors and Affiliations
Volodymyr Karachun
Keywords
Related Articles
- EP ID EP588560
- DOI -
- Views 83
- Downloads 0
POSSIBILITIES OF DIAGNOSTICS OF GESTOSIS OF PREGNANCY WITH THE USE OF NEUROET NETWORK TECHNOLOGIES
The proposed approach to optimization of the diagnosis of preeclampsia using registration key hemodynamic parameters, which allows to objectively evaluate the hemodynamics in pregnant women with preeclampsia, to determin...
MATHEMATICAL MODELING CHARACTERISTICSOF OIL PUMPS FOR CHANGE OF ROTATIONAL FREQUENCY
The method of mathematical modeling characteristics of pumping units for oil pipelines rotary frequency was improved. For recalculation were used graphic characteristics of pumps, obtained experimentally for the nominal...
EXPERIMENTAL COMPARISON OF THE WORK OF PARALLEL PROGRAMMING TOOLS ON VARIOUS SUPERCOMPUTERS FOR THE FLOYD-WARSHAL ALGORITHM
The experimental comparison of the parallel programming libraries MPI and openMP on the supercomputer of the National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute" and the cluster Colfax Inte...
SOLVENT SUBLATION ZINC IONS FROM WATER SOLUTIONS
Solvent sublation is a combined method that includes advantages of ionic flotation and liquid extraction. This is a process in which flotation product (sublate) concentrates in a thin layer of organic liquid, which is lo...
DETERMINATION OF THE STRESSED STATE IN ORTHOTROPIC CYLINDRICAL SHELL WITH HOLES
The method of determination of stresses in orthotropic cylindrical shell with two holes on one guide was given. The shells model of Timoshenko was used. The method of finite elements was used. The strain distribution aro...