Effect of Linear Energy and Microstructure on the Content of Residual Hydrogen in Welded Joints made of Superduplex Steels
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2016, Vol 60, Issue 5
Abstract
The article presents tests concerning the content of retained hydrogen present in FCAW and SAW welded joints made of superduplex steel. The use of various welding processes resulted in the obtainment of welds having different microstructures and ferrite contents. Measurements of retained hydrogen present in joints (performed using the complete combustion method) revealed various contents of hydrogen in the base material and in the welds subjected to the tests. It was determined that the content of hydrogen in welds made of superduplex steels depends not only on the volumetric content of microstructures but also on their composition and welding heat input.
Authors and Affiliations
Aleksandra Świerczyńska, Jerzy Łabanowski, Dariusz Frydrych
Keywords
Related Articles
- EP ID EP257623
- DOI 10.17729/ebis.2016.5/22
- Views 69
- Downloads 0
Effect of Welding Conditions on the Structure and Properties of Joints Made of Wrought Aluminium Alloys in High-Speed FSW
The FSW process is primarily used to join elements made of similar materials. Generally, the making of structures involving the use of similar materials require low welding rates. The article presents research results co...
FEM-Based Numerical Analysis of the Laser Welding of Air Conditioner Components
The article presents the FEM-based numerical model of the laser beam welding process. The modelling aimed to identify the effect of technological conditions of the laser welding of elements on the heating dynamics and th...
Development of Methods for the Assessment of Stresses in Welded Structure Elements. Part 2. The Latest Methods
Disadvantages of traditional methods for the determination of stresses in stress concentration zones of welded joints discussed in the first part of this overview required to be classified and inspired the development of...
Assessment of Electrode Consumption in Resistance Welding
The article discusses the assessment of electrode consumption during spot resistance welding processes. The process was performed using a manipulator provided with a welding head. During the process, welding parameters,...
Measurement System for the Monitoring of Laser + MAG Welding Parameters
This paper presents the design, technical possibilities and the intended use of a multi-station measurement system for HLAW process monitoring. The system used at the production site allows the monitoring and recording o...