Regularity of low-speed detonation processes in the shock-tubes
Journal Title: Metallurgical and Mining Industry - Year 2017, Vol 9, Issue 4
Abstract
The paper presents the results of studies of low-speed detonation processes in shock-tubes. The complex methodology of experimental studies of basic performance of the tubular detonating waveguide providing a sufficient degree of accuracy with an error of no more than 5% is applied. The mechanism of initiation by an electric explosive, development and low-speed damping of the shock front in the fiber cladding material deposited without explosives and detonation formation process along the length of the waveguide with a deposited layer of explosives is established. The points of its nucleation and growth to maximum velocity of detonation in the area of 0.5 m length and maintaining it at a constant level over the whole length in the range of values (for test samples) of about 1000 m / s are fixed.
Authors and Affiliations
Roman Zakusylo, Viktor Kravets
Keywords
Related Articles
- EP ID EP310867
- DOI -
- Views 97
- Downloads 0
Determination of coefficients of heat output of hot-blast stove checkers with horizontal passages
The benefits and results of physical modeling of new design of block checkers with horizontal passages are shown in the paper. They are developed by fellows of department of Ecology, Heat- Transfer and Labour Protection...
Improvement of Environmental Safety of Population in Uranium-Mining Regions Ukraine
Objective is to increase ecological safety of population in uranium mining regions on the basis of scientific substantiation, development and introduction of rehabilitation measures for minimization of negative effects o...
Influence of Additives-Wastes of Chemical Industry Enterprises on the Properties of Reinforced Concrete in Transport Structures
Abstract As a result of corrosion processes, crystals are formed inside the concrete, the growth of which leads to the occurrence of cracks and destruction of reinforced concrete transport structures. For the longterm pr...
Physical properties of low-temperature casting moulds
With this paper we pursued the objectives to define the rational value for the moisture in the moulding compound applied for manufacturing low-temperature moulds (hereinafter referred as LTM), to determine the impact of...
Reliability control of failure-free operation of power supply system of railroad and its components by methods of intellectualization and informatization
We conducted the fundamental, applied and experimental studies to solve a complex problem of the innovative transformation of traction electrical networks of railways and their management system. It is achieved by creati...