Study of Mechanical Behaviour Natural Fibers Reinforced Composite Materials
Journal Title: International Journal of Engineering Innovations and Research - Year 2018, Vol 7, Issue 2
Abstract
In this work the investigation of experimental study of the evaluation of the different natural fiber as reinforcement with epoxy composites of mechanical properties. Composites were fabricated using Sisal/epoxy, Banana/epoxy, and Fish scale/epoxy in compression molding method. All the combination of the composite are made same % of combination (fiber + Resin) were fabricated. The results showed that tensile strength of the composite increased in sisal fiber/epoxy composite. Impact strength of Sisal fiber/epoxy composite shows good properties when compared with reaming two combinations. Likewise flexural strength of Sisal fiber/epoxy composite was found higher than those two combinations.
Authors and Affiliations
R. Jeevanantham, et al.
Keywords
Related Articles
- EP ID EP496622
- DOI -
- Views 88
- Downloads 0
Loadability Analysis of the Effect of Generation and Transmission Expansion in Southern Nigeria
Electrical energy demand in Nigeria has increased due to economic activities as a result of increase in population. The Southern region, experience stranded power due to the proximity of most of the gas thermal power sta...
Application and Design of Regional Geothermal Heating System Design for Citgol Municipality
In this study; the project design and application of regional heating system with geothermal energy in Citgol Municipality which has population around 4000-people were performed. It was accentuated on project management...
A Novel Tool Design for Selection of Low Power Wind Turbines
The use of alternative energy sources is beginning to increase with the increase in energy needs all over the world. With this increase, energy production from alternative energy sources is being tried to be obtained fro...
Cyclic Bending Failure of Local Sharp-Notched Circular Tubes with Different Diameter-to-Thickness Ratios
In this study, the failure of local sharp-notched 6061-T6 aluminum alloy tubes with different diameter-to-thickness ratios submitted to cyclic bending are studied. Different diameter-to-thickness ratios of 16.5, 31.0 and...
The Prediction on Beijing Rail Transit Passenger Capacity Based on Grey GM (1,1)
In the last few years, Chinese rail transit develops rapidly and the passenger capacity is the basement of the rail transit scheme, design and operation so that pressing ahead the passenger capacity prediction plays a si...