3D MODELLING OF A COMPLEX CEILING CONSTRUCTION USING NON-CONTACT SURVEYING TECHNOLOGIES
Journal Title: Structure and Environment - Year 2019, Vol 11, Issue 1
Abstract
Geodetic inventory of complex architectural complexes – technological facilities in industrial plants, refineries, complex constructions, buildings, etc. is a complex task. Inventory carried out with advanced measurement techniques requires synchronization of the apparatus, taking into account the specificity of the spatial structure of the object and local conditions, as well as the method of developing the results and visualizing the final effect. The article presents an example of surveying the complex structure of the ceiling in the „Food Court“ part of the Optima Shopping Center in Košice. The main purpose of this task was to demonstrate the usefulness of laser scanning, create a digital spatial model of a steel roof structure and make it available for further work. The measurement was made with a Leica ScanStation C10 laser scanner. The data processing was done in software: Leica Cyclone, Bentley Microstation V8i and Leica Cloudworx plug-in. The final effect of the inventory of the ceiling structure is presented in the form of a spatial CAD model.
Authors and Affiliations
KAROL BARTOŠ, JANKA SABOVÁ, KATARINA PUKANSKÁ, PETER BLIŠTÁN, Paweł Frąckiewicz
Keywords
Related Articles
- EP ID EP546656
- DOI 10.30540/sae-2019-005
- Views 103
- Downloads 0
PASSIVE ENERGY REDUCTION TECHNOLOGIES IN ENVIRONMENTAL ENGINEERING
The paper presents a review of passive techniques used in environmental engineering and construction, aimed at reducing energy consumption for heating or cooling purposes. These are: green facades, cooling coatings, ther...
THE INFLUENCE OF CELLULOSE ETHERS ON THE CHOSEN PROPERTIES OF CEMENT MORTAR IN THE PLASTIC STATE
The influence of cellulose ether on the consistency, water retention (WRV parameter) and setting and hardening process of cement mortar is discussed in this article. The composition of researched mortars differed in the...
THE TEMPERATURE DISTRIBUTION OF THE MATERIALS IN THE CONVECTIVE HEAT TRANSFER
A new method for solving the equations of thermal conductivity materials with specific properties. This method is useful for an approximate estimate of the temperature field of materials.
REALIZATION OF UNDERGROUND OBJECTS BY THE OPEN CAISSON METHOD IN CONDITIONS OF BUILT-UP AREAS
The article presents the construction of underground objects by open caisson method, under conditions of built-up areas. The technological stages of the open caisson sinking have been separated. The work identified the m...
EXPERIMENTAL MEASUREMENTS OF GRAVITY HEAT PIPE WITH NH3 MEDIUM TO OBTAIN LOW-POTENTIAL GEOTHERMAL HEAT
Earth / water heat pumps using vertical heat exchangers do not require large areas and do not depend on the intensity of the sun’s radiation that strikes the surface of the earth. Vertical heat exchangers work efficientl...