A Brief Introduction to the Bird Strike Numerical Simulation
Journal Title: American Journal of Engineering and Applied Sciences - Year 2016, Vol 9, Issue 4
Abstract
Abstract Bird impacts can be extremely critical events for the air transport safety. Since aircraft structures have become more and more complex components, the numerical prediction of the damage onset and evolution induced by a bird impact has become a very challenging task. The aim of this work is to provide a brief overview of the numerical techniques adopted for the prediction of the bird impact phenomenon on a leading edge of a regional aircraft wing. Smooth Particle Hydrodynamics (SPH), Rigid and Lagrangian models have been investigated and the results have been compared and critically assessed. Copyright © 2016 Aniello Riccio, Roberta Cristiano and Salvatore Saputo. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Authors and Affiliations
Aniello Riccio, Roberta Cristiano, Salvatore Saputo
Keywords
Related Articles
- EP ID EP202295
- DOI 10.3844/ajeassp.2016.946.950
- Views 99
- Downloads 0
Exploitation of Battery Energy Storage in Load Frequency Control -A Literature Survey
Abstract Deregulation of the electricity market and the continued attempts by the international community to reduce the effects of global climate change have resulted in a rapid increase in the usage of different renewa...
p-n Junction of 1.95 nm Carbon Nanotube: Fabrication, Properties and Performance
Abstract Carbon Nanotube (CNT) is the substitution of silicon material for designing of transistor device due to the shortcoming of silicon properties. In this study, 1.95 nm diameter of CNT is fabricated and characteri...
Velocities and Accelerations at the 3R Mechatronic Systems
Abstract This article presents an original method to determine the speeds and accelerations to structures MP R-3 The structure of the 3R (space) are known (required) rotation speeds of the triggers and must be determine...
Experimental Investigation of Limonene-based Environmental-Friendly Emulsion Drilling Mud
Abstract The use of emulsion drilling mud in the oil and gas industry has gained wide acceptance. However, the disposal of drill cuttings and the waste of such emulsion drilling mud usually poses environmental concern....
A Perspective on 3D Bioprinting Technology: Present and Future
Abstract Bioprinting, an additive manufacturing technique, has become the cynosure of research and industry world alike. This emerging technology holds the promise of constructing artificial tissues and organs in future...