A CHOICE OF SECTIONS OF ELECTRIC WIRES AND CABLES IN CIRCUITS OF DEVICES OF HIGH-VOLTAGE HIGH-CURRENT IMPULSE TECHNIQUE
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 6
Abstract
Purpose. Implementation of calculation choice of sections of electric wires and cables in circuits of devices of high-voltage high-current impulse technique (HHIT), characterized flowing of pulsed current ip(t) with different amplitude-temporal parameters (ATP). Methodology. Electrophysics bases of technique of high-voltage and high pulsed currents, theoretical bases of the electrical engineering, bases of electrical power engineering, technique of high electric and magnetic fields, and also measuring technique. Results. The results of the developed generalized electrical engineering investigations are resulted in a calculation choice on the condition of thermal resistibility of cable products of boundary permissible sections SCil of the electric uninsulated wires, and also insulated wires and cables with copper (aluminum) cores (shells) with polyvinyl chloride (PVC), rubber (R) and polyethylene (PET) insulation, on which in the circuits of HHIT the axial-flow of pulsed current ip(t) flows with arbitrary ATP. On the basis of this approach the results of concrete choice of sections SCil are presented for the indicated electric wires (cables) of power circuits of HHIT with pulsed current, ATP of which with amplitudes of Imp = (0.1-1000) kА change on an aperiodic law or law of damped sinusoid in nanо-, micro- and millisecond temporal ranges. The results of calculation estimation present maximum permissible approximations of δCil of pulsed current ip(t) of the examined temporal shapes in the indicated electric wires and cables of power circuits of HHIT. It is shown that the values of current approximations of δCil for the uninsulated copper (aluminum) wires in the nanosecond temporal range of ATP of pulsed currents ip(t) are about 495 (293) kA/mm2, in the microsecond temporal range – 26 (15) kA/mm2 and in a millisecond temporal range – 543 (320) A/mm2. By a calculation it is set that for the insulated wires (cables) with copper (aluminum) cores (shells) and PET with insulation the indicated current approximation of δCil is approximately: for the nanosecond range – 361 (233) kA/mm2; for the microsecond range – 19 (12) kA/mm2; for the millisecond range – 396 (256) A/mm2. Originality. Firstly by a calculation for the concrete temporal shapes of pulses of current ip(t) in the discharge circuits of HHIT, changing in the wide range of the amplitudes Imp on a aperiodic law or law of damped sinusoid, the numeral values of cross-sections SCil and current approximations of δCil are obtained for the uninsulated wires, insulated wires and cables with copper (aluminum) cores (shells) with PVC, R and PET insulation. Practical value. Application in practice of model tests of objects of electrical power engineering, aviation and space-rocket technique on resistibility to direct action of pulsed currents ip(t) with different ATP of natural (currents of lightning) and artificial (discharge currents of HHIT) origin to increase electro-thermal resistibility of the electric uninsulated wires, and also the insulated wires and cables with PVC, R and PET insulation of HHIT widely applied in power circuits.
Authors and Affiliations
M. I. Baranov
Keywords
Related Articles
- EP ID EP495492
- DOI 10.20998/2074-272X.2018.6.08
- Views 94
- Downloads 0
MAGNETIC PULSED PROCESSING OF METALS FOR ADVANCED TECHNOLOGIES OF MODERNITY – A BRIEF REVIEW
The aim of the article is dedicated to the brief review of the main achievements of the advanced technologies with usage of the energy of the pulsed magnetic fields. Originality. The new suggestions are represented. They...
THEORETICAL AND EXPERIMENTAL RESULTS OF RESEARCH INTO EXPLANATION OF DE BROGLIE HALF-WAVE EXISTENCE IN THE MICROSTRUCTURE OF AN ACTIVE METALLIC CONDUCTOR
The paper presents theoretical and experimental results of research on longitudinal wave distribution of drifting free electrons in a round metallic conductor with high-density pulse axial current. The data directly indi...
A TECHNIQUE OF MEASURING OF RESISTANCE OF A GROUNDING DEVICE
Introduction. Measurement of resistance of the grounding device (GD) by means of a three-electrode system. This requires not only the right choice of installation locations of measuring electrodes, but also the determina...
DECREASE IN THE DAMAGE OF POWERFUL TURBOGENERATOR STATOR CAUSED BY VIBRATION IN THE END ZONES (ANALYSIS, HYPOTHESES, EXPERIMENT)
The analysis of the turbogenerators’ TВВ-1000-2Y3 failure has shown that the most vulnerable link in the stator is such of their elements as tightening prisms, the teeth of the end packet core, lead-out and connecting bu...
AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 45: TRADITIONAL POWER ENGINEERING. HYDRAULIC POWER PLANTS: STATE AND PROSPECTS OF THEIR DEVELOPMENT
Purpose. Preparation of brief scientific and technical review about the state, achievements, problems and prospects of development of world hydraulic power engineering. Methodology. Known scientific methods of collection...