A CONSISTENT AYRTON-PERRY APPROACH FOR THE FLEXURAL-TORSIONAL BUCKLING RESISTANCE EVALUATION OF STEEL I-SECTION MEMBERS
Journal Title: Civil and Environmental Engineering Reports - Year 2017, Vol 2, Issue 25
Abstract
Steel I-section members subjected to compression a monoaxial bending about the major axis are dealt with in this paper. The current Eurocode’s design procedure of such members is based on a set of two interpolation equations. In this paper a simple and yet consistent Ayrton-Perry methodology is presented that for beam-columns yields the Ayrton-Perry design strategy similar to that utilized in the steel Eurocodes for design of beams and columns but not used so far for the beam-column design. The results from developed design criterion are compared with those of Method 1 of Eurocode 3 and the Ayrton-Perry formulation of a different format that has been recently published.
Authors and Affiliations
Marian GIŻEJOWSKI, Zbigniew STACHURA
EFFECT OF ORGANIC SUBSTANCES ON THE EFFICIENCY OF Fe(II) TO Fe(III) OXIDATION AND REMOVAL OF IRON COMPOUNDS FROM GROUNDWATER IN THE SEDIMENTATION PROCESS
One of the problems with iron removal from groundwater is organic matter. The article presents the experiments involved groundwater samples with a high concentration of total iron - amounting to 7.20 mgFe/dm3 and an inc...
TEMPERATURE PROFILES IN A MICRO-PROCESSOR COOLED BY DIRECT REFRIGERANT EVAPORATION
An analytical solution to the equation for cooling of a unit, in the interior of which heat is generated, is presented. For that reason, a simplified non--stationary model for determination of the temperature distributio...
Reduction of pollutant concentrations in the plant systems with the inert filter bed. Part I: biological absorbtion of nitrogen and phosphorus in nitrophytes in micro - cultivations fertilized with domestic wastewater
The publication presents the experiment conducted on the nitrophyte plants of the species Polygonum persicaria L. and Epilobium parviflorum Schr., in the micro- cultivation with the inert filter bed filled in with an art...
Composition of a plan of an architectural complex
It may be proved that the space should be composed in a certain and not other manner for specific needs and objectives so that its form was not accidental. The composition is a very important part of creation - the knowl...
MONITORING OF LANDSLIDE AREAS WITH THE USE OF CONTEMPORARY METHODS OF MEASURING AND MAPPING
In recent years, there is an increase of landslide risk observed, which is associated with intensive anthropogenic activities and extreme weather conditions. Appropriate monitoring and proper development of measurements...