A high throughput chemiluminescence method based on molecularly imprinted sol-gel films for determination of sibutramine
Journal Title: Advanced Materials Letters - Year 2010, Vol 1, Issue 2
Abstract
A novel and high throughput chemiluminescence (CL) method for determination of sibutramine was originally developed based on potassium permanganate-hydrochloric acid-(tween-80) CL system. Molecularly imprinted sol-gel film (MIF) was synthesized and used as selective material to improve the selectivity of CL. In the proposed procedure, sibutramine molecule as adsorbed into the MIF, and then potassium permanganate, hydrochloric acid and tween-80 were added in wells of a 96-well plate, Based on which, sibutramine was oxidized and CL was produced and detected by a photomultiplier tube (PMT). The CL intensity was correlated linear with the concentration of sibutramine over the range of 5.0 × 10[sup]-8[/sup]-1.0 × 10[sup]-6[/sup] g mL[sup]-1[/sup] and the detection limit was 1.8 × 10[sup]-8 [/sup]g mL[sup]-1[/sup]. The relative standard deviation (RSD) was 3.1% for determination of 1.0 × 10[sup]-7[/sup] g mL[sup]-1[/sup] sibutramine (n = 11). The fabricated molecularly imprinted sol-gel film possessed good selectivity and could be regenerated. This method was successfully applied to the determination of sibutramine in weight-reducing tonic.
Authors and Affiliations
Fuwei Wan, Jinghua Yu, Shenguang Ge, Mei Yan, Kexiao Yu, Meng Zhang
Keywords
Related Articles
- EP ID EP84941
- DOI 10.5185/amlett.2010.7138
- Views 198
- Downloads 0
X-ray and electrical properties of Ba(Gd0.5Nb0.5)O3 ceramic
The complex perovskite oxide barium gadolinium niobate, Ba(Gd0.5Nb0.5)O3 (BGN) is synthesized by a solid-state reaction technique. The X-ray diffraction of the sample at room temperature shows a tetragonal phase. The sca...
A high throughput chemiluminescence method based on molecularly imprinted sol-gel films for determination of sibutramine
A novel and high throughput chemiluminescence (CL) method for determination of sibutramine was originally developed based on potassium permanganate-hydrochloric acid-(tween-80) CL system. Molecularly imprinted sol-gel fi...
ERRATUM to “Microwave assisted synthesis of chitosan-graft-styrene for efficient Cr(VI) removal”: [Adv. Mat. Lett. 2010, 1(1), 59-66]
In this study, we have synthesized chitosan-grafted-styrene (Ch-g-sty) without any radical initiator or catalyst using microwave (MW) irradiation. Ch-g-sty was synthesized with 187% grafting using 80 % MW power in 40 sec...
Deoxyribonucleic acid imprinted biosensor technology
In recent years, molecularly imprinted polymers (MIPs) have attracted much attention due to many of its potential applications including sensors, separation, catalysis, drug delivery and waste management. To prepare MIPs...