A MATLAB Graphical User Interface Dedicated to the Optimal Design of the High Power Induction Motor with Heavy Starting Conditions
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2014, Vol 21, Issue 2
Abstract
In this paper, a Matlab graphical user interface dedicated to the optimal design of the high power induction motor with heavy starting conditions is presented. This graphical user interface allows to input the rated parameters, the selection of the induction motor type and the optimization criterion of the induction motor design also. For the squirrel cage induction motor the graphical user interface allows the selection of the rotor bar geometry, the material of the rotor bar as well as the fastening technology of the shorting ring on the rotor bar. The Matlab graphical user interface is developed and applied to the general optimal design program of the induction motor described in [1], [2].
Authors and Affiliations
Maria Brojboiu, Virginia Ivanov
Keywords
Related Articles
- EP ID EP460882
- DOI -
- Views 116
- Downloads 0
An Investigation about using Nanorefrigerants in Air Conditioning Systems According to the Theoretical, CFD and Experimental Review of the Recent Literature
Greenhouse gases (GHG) causing global warming and climate change. In the year 2014, 32.3 billion tones CO2 emitted to the atmosphere as the most important greenhouse gas. According to the statistics, a significant portio...
A Review on Natural Convection in Nanofluid Flow
The Heat transfer is performed in three forms including conduction, convection and radiation. Convection is one of the major modes which classifies into three categories: natural, mixed or forced convection. In recent ye...
Optimizing Distribution Problems using WinQSB Software
In the present paper we are presenting a problem of distribution using the Network Modeling Module of the WinQSB software, were we have 5 athletes which we must assign the optimal sample, function of the obtained time, s...
Case Study Regarding the Design of a Direct Current Electromagnet for the MIG Welding of Metallic Materials Part I: Description of the Welding Methods and Preliminary Calculus of the Electromagnet
The paper refers to the design of a direct current electromagnet, located on the head of a swan neck welding gun of a MIG welding equipment and used for magnetising the rotation space of two additional electric arches, i...
Modal-Based Design Improvement of a Butterfly Valve Disc
The dynamic behavior​ control of a butterfly valve is important because, when one of the valve disc natural frequency is close to the frequency of vortex shedding, which appears when the valve is fully open or partially...