A Modified Radial Basis Function Method for Predicting Debris Flow Mean Velocity
Journal Title: Journal of Engineering and Technological Sciences - Year 2017, Vol 49, Issue 5
Abstract
This study focused on a model for predicting debris flow mean velocity. A total of 50 debris flow events were investigated in the Jiangjia gully. A modified radial basis function (MRBF) neural network was developed for predicting the debris flow mean velocity in the Jiangjia gully. A three-dimensional total error surface was used for establishing the predicting model. A back propagation (BP) neural network and the modified Manning formula (MMF) were used as benchmarks. Finally, the sensitivity degrees of five variables that influence debris flow velocity were analyzed. The results show that the mean error and the relative mean error of the 10 testing samples were only 0.31 m/s and 5.92%, respectively. This proves that the MRBF method performed very well in predicting debris flow mean velocity. Gradient of channel and unstable layer thickness have a greater impact on debris flow mean velocity than the other three influencing variables. This proves that the proposed MRBF neural network is reliable in predicting debris flow mean velocity.
Authors and Affiliations
Yang Wenmin
Keywords
Related Articles
- EP ID EP324151
- DOI 10.5614/j.eng.technol.sci.2017.49.5.1
- Views 123
- Downloads 0
Macro Data Analysis of Traffic Accidents in Indonesia
This paper presents a macro data analysis of Indonesian road accidents in the form of statistical data. Traffic accidents and their subsequent fatalities bring enormous social and economic consequences. A good understand...
Treatment Optimization of Electrocoagulation (EC) in Purifying Palm Oil Mill Effluents (POMEs)
Palm oil mill effluents (POMEs) can contaminate soil, groundwater, and also the water environment. The increasing production of crude palm oil in Indonesia produces an enormous amount of POME waste. Therefore, a method i...
An Analysis of the Effect of the Implementation of an Integrated Management System (IMS) on Work Ergonomics in an O&M Power Plant Company
Ergonomics has developed significantly for the prevention of related accidents. Its implementation, however, depends on the existing management system within a company. The integrated management system (IMS) is frequentl...
Preliminary Study on Treatment of Palm Oil Mill Effluent by Sand Filtration-Dielectric Barrier Discharge System
In the palm oil industry, open ponding, aerobic and anaerobic digestion, physicochemical treatment and membrane filtration are generally applied as conventional treatments of palm oil mill effluent (POME). In this study,...
Modified Two-Step Dimethyl Ether (DME) Synthesis Simulation from Indonesian Brown Coal
A theoretical study was conducted to investigate the performance of dimethyl ether (DME) synthesis from coal. This paper presents a model for two-step DME synthesis from brown coal represented by the following processes:...