A Review of Machining Characteristics in Mechanical Drilling of Super Alloys
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Super alloys are extensively used in the field of aerospace to manufacture aircraft engine components such as casings, rings, seals, fasteners, turbine blades, vanes, discs, shafts, combustors and general engine hardware. Drilling is a very important process that is mainly used to make a hole in the aircraft engine components. The quality of the drilled whole characteristics is of prime importance in the development of aero-engine components. This study reviews the machiniability of drilling of super alloys during drilling through various aspects such as cutting environment, tool materials and geometry, drilling parameters and their influences on surface roughness, cutting force, tool wear, temperature, surface integrity, and chip morphology. The results indicated that very few studies have been made on the machinability of super alloys during drilling with respect to surface integrity. Further, there is a need to create a multi response optimization in the drilling of super alloys to obtain optimum results of surface integrity, thrust force, temperature, tool wear, surface roughness, and chip morphology
Authors and Affiliations
M. NAGARAJ, C. EZILARASAN, A. JOHN PERSIN KUMAR, A. VELAYUDHAM
Keywords
Related Articles
- EP ID EP279995
- DOI 10.24247/ijmperdfeb201864
- Views 98
- Downloads 0
Influence of Addition of Silicon on Mechanical Properties of Aluminium - Zinc Alloy
In this investigation, the experiment was conducted to analyze the mechanical properties such as Yield Strength, Ultimate Tensile Strength, Hardness on Al-Zn alloy of different composition Specimen 1 (89.4%Al4%Zn1%Mg0.6%...
Fabrication and Charecterisation of Aluminum-Graphite Composite Material
Matel matix composites have better properties and performance, compared to the pure metals that justifies their added cost. The present work includes fabrication of metal matrix composite having Aluminium as a base metal...
CFD Approach for Off-Design Efficiency Improvement of Double Suction Centrifugal Pump
The energy consumed by a large pump to transport the water has a dominant role in pumping system and hence the efficiency of the pump is of great concern to both manufacturer and customer in large size pumps. The pumps m...
ANALYSIS OF A PART USING DYNAMIC SIMULATION AND REAL TIME EXPERIMENTS IN PART FEEDERS
In the modern industrial world, agility in manufacturing and assembly line is the key for improving the productivity. Segregation and feeding of parts in assembly line is important for reducing the manufacturing lead tim...
EFFECT OF DIE SLEEVE MATERIAL ON MECHANICAL BEHAVIOR OF A413 ALUMINIUM ALLOY PROCESSED THROUGH SQUEEZE CASTING ROUTE
Squeeze casting as liquid-metal forging process by which molten metal solidifies under pressure within closed dies positioned between the plates of a hydraulic unit. The main objective of this work is to investigate the...