A Voltage Oriented Control Method for PV - Grid Interfaced Inverter by Using Advanced MPPT Algorithm
Journal Title: International Journal of Science Engineering and Advance Technology - Year 2014, Vol 2, Issue 9
Abstract
The output power of PV module varies with module temperature, solar irradiation and loads. And in order to quickly and accurately track the sun, it is necessary to track the maximum power point (MPP) all the time. An improved maximum power point tracking (MPPT) with better performance based on voltageoriented control (VOC) is proposed to solve a fast changing irradiation problem. In VOC, a cascaded control structure with an outer dc link voltage control loop and an inner current control loop is used. The MPPT controller is applied to the reference of the outer loop control dc voltage photovoltaic (PV). In this project, the main component of the single-stage grid connected PV system is the three-phase voltage source inverter (VSI). The voltage-oriented control (VOC) method used for VSI employs an outer dc link voltage control loop and an inner current control loop to achieve fast dynamic response. The performance of the power flow depends largely on the quality of the applied current control strategy. In this project, the current control has been implemented in a rotating synchronous reference frame d, q because the controller can eliminate a steady-state error and has fast transient response by decoupling control. The robust tracking capability under rapidly increasing and decreasing irradiance is verified in simulations. Simulation results on a large-scale gridconnected PV system show the effectiveness of the proposed control scheme in terms of delivering maximum power into the grid under variable conditions.
Authors and Affiliations
HIMA BINDU S| P.G. scholar, Dept of EEE Trr College of Engineering & Technology, Hyderabad, Telangana, India, BHARGAV RAM T| Associate professor, Dept of EEE Trr College of Engineering & Technology, Hyderabad, Telangana, India
Keywords
Related Articles
- EP ID EP16306
- DOI -
- Views 373
- Downloads 21
Power Quality Improvement in 3P4W System Using Unified Power Quality Conditioner (UPQC) with P-Q Theory
Unified power quality conditioners (UPQCs) allow the mitigation of voltage and current disturbances that could affect sensitive electrical loads while compensating the load reactive power. Diverse control techniques...
Direct Power Control By Using Matrix Converter Based UPFC
This paper describes direct power control (DPC) by using Matrix converter based Unified power flow controller (UPFC). The basic problems of UPFC’s are discussed, however this paper proposes an alternative solution...
Habitual Test Packet Generation And Fault Localization
Networks are getting larger and more complex, yet administrators rely on rudimentary tools such as and to debug problems. We propose an automated and systematic approach for testing and debugging networks called “A...
Identifying And Removing Shadow Attacks Based On Password Reuses
We inspected the best in class Intra-Site Password Reuses (ISPR) and Cross-Site Password Reuses (CSPR) in view of the spilled passwords from the greatest Internet client gathering. With an accumulation of around 70 m...
This work implements a new approach of fuzzy logic based space vector regulation with respect to the immediate torque controlled acceptance engine bolstered by four switch three stage inverter (FSTPI) to conquer the...