About the Influence of Temperature Changes on the Natural Frequencies of Clamped-Clamped Euler-Bernoulli Beams
Journal Title: Romanian Journal of Acoustics and Vibration - Year 2014, Vol 11, Issue 2
Abstract
In this paper a beam subjected to axial forces induced by temperature changes has been analyzed, in order to highlight the effect of this parameter on the structures natural frequencies. The modal analysis, performed by means of the finite element method (FEM), was conducted on an isotropic double-clamped beam. First the buckling critical loads were derived analytically and the post-buckling domain consequently spited in sub-domains; each of them is characterized by a specific mode shape produced by the static compressive load. Afterwards, the beam was thermally stressed and a step-by step analysis, in which the temperature was gradually changed, was performed. For the modal analysis in case of decreased temperatures a step of five Kelvin degrees was imposed, because just stretching forces are present and he phenomenon is simple to be described. In case of increasing the temperature buckling occurs and the dynamic behavior is more complex. Therefore, a finer step of one Kelvin degree was imposed in the analysis; it helped to find the critical temperatures where the frequencies take the zero value and to correlate these temperatures with the values obtained from the static analysis.
Authors and Affiliations
Marius TUFOI, Gilbert GILLICH, Zeno PRAISACH, Vasile IANCU, Horia FURDUI
Keywords
Related Articles
- EP ID EP163289
- DOI -
- Views 59
- Downloads 0
Noise Control on Locomotive Driver Workingstation
Traffic safety and transport security are concepts according to which the train traffic and maneuvers must be conducted without danger and risks for the workers, for travelers, goods entrusted to transport, railway vehic...
Influence of Damping Over the Rudder Control System of an Aircraft
The control system of the rudder of an aircraft can be modeled in a first order approximation as a system of rigid bodies that transmits instantaneously the desired motion to the movable part of the vertical tail. Howeve...
Numerical Study of the Vibrations with Collisions of a System with Nonlinear Cubic Stiffness, Dry Friction and Harmonic Excitation
In this paper we consider a non-linear single degree of freedom system with dry friction consisting in a mass that oscillates between two fixed barriers. Our study is a numerical one and we determine the influences of di...
Limits of the Discrete Fourier Transform in Exact Identifying of the Vibrations Frequency
This paper present the limitations encountered by using the Discrete Fourier Transform for the analysis of vibration signals. Difficulties in determining the precise frequencies appear particularly in cases where the acq...