About the methodology of experimental investigation of the damages influence on the stress-strain state and the residual bearing capacity of the inclined sections of reinforced concrete beams
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2018, Vol 1, Issue 71
Abstract
The article reports on the developed technique for conducting the experimental studies to determine the effect of concrete damages in compressed zone of rectangular cross-section reinforced concrete beams on their stressed-strain state and the residual bearing capacity of inclined sections with the formulation of studies using the mathematical method of experiment planning. In according to the experiment planning matrix, 15 samples of reinforced concrete beams were fabricated. The dimensions of the beams are 100×200×1200 mm and the working span is 1000 mm. In the beams the artificial damages of the compressed zone of concrete are laid in advance in different sizes, the different size of the shear span are also used. Materials for beams: concrete ‒ grade C25/30; working longitudinal reinforcement ‒ Ø18 mm of grade A500C; constructive longitudinal reinforcement and transverse reinforcement ‒ Ø6 mm of grade А400С. To measure the deformations of reinforcement and concrete, strain gauges with a base of 10 mm for the steel reinforcement and 50 mm for the concrete are used. To determine the physical-mechanical properties of materials, control samples of cubes and prisms were selected.
Authors and Affiliations
K. V. , Polianskyi
Keywords
Related Articles
- EP ID EP510750
- DOI -
- Views 136
- Downloads 0
bearing capacity of compressed steel reinforced concrete structural elements using shaped pipes with cavities for engineering communications
In some cases, during the design and construction of buildings and structures, there is a need to hide engineering networks within the bearing structures. For this purpose it is advisable to use cavities for engineering...
Differential equations of the spatial bending of reinforced concrete beams and frames, taking into account physical and geometrical nonlinearities and plasticity of concrete
In solving static and dynamic problems for reinforced concrete frames based on nonlinear and plastic properties of materials in order to achieve sufficient accuracy, it is necessary to make reinforced concrete frames ele...
Urban planning aspects of reconstruction of transport infrastructure and the creation of artificial territories
This article discusses aspects of one of the main reasons that complicate urban development of the city of Odessa – particularly road transport network, which does not meet the needs of freight and passenger traffic of t...
Use of integral calculus for building developments of undevelopable surfaces of revolution
Generally, students of architecture use rather simple geometric elements: planes, prisms, cylinders, etc to represent their architectural decisions with paper and card models. However, nowadays modern architects are tryi...
Safe functioning of the product as a function of the structural variety of concrete
The purpose of the work is to increase resistance of concrete during the operation of building products in conditions of repeated freezing-thawing and wetting-drying. An important property of concrete is its ability to a...