ABRASIVE WEAR FOR SELECTED GRADES OF LOW-CARBON BORON STEELS AT DIFFERENT STATES OF HEAT TREATMENT
Journal Title: Tribologia - Year 2012, Vol 244, Issue 4
Abstract
In recent years, steels with boron, which belonged to a group of abrasion resistant steels, have become increasingly popular. These steels are produced by using advanced technology of manufacturing and economically achieve very good mechanical properties. Applying these steels can extend the lifetime of expensive machining equipment in many industries, such as mining and the agriculture industry [L. 1, 2]. High values of mechanical strength and abrasion resistance are achieved after heat treatment (hardening and tempering). However, these steels are tailored to customer needs and supplied by the manufacturers. The article presents the results of abrasive wear resistance tests and analysis of the abrasive wear mechanism for two grades of steels, B27 and 28MCB5, for the delivery state and different stages of heat treatment. The steels are manufactured by two well-known European companies – Rautaruukki Corporation (Finland) and Zerneri Acciai Company (Italy). According to the manufacturers, these steels can be used for linings and wear parts for machines and equipment, edge plates, blades and chains, tools, screw conveyors, wear plates, fan blades, and especially in the agricultural machinery industry, both in parts subject to wear, as well as structural elements.
Authors and Affiliations
Beata Łętkowska, Włodzimierz Dudziński, Stanisław Frydman
Keywords
Related Articles
- EP ID EP270466
- DOI -
- Views 60
- Downloads 0
THE ANALYSIS OF THE INFLUENCE OF GAMMA IRRIADIATED POLYSULFONES ON THE STATIC FRICTION COEFFICIENT
The paper presents the results of studies on the effects of gamma irradiation on the static friction coefficient of thermoplastic polymer – polysulfone. These polar polymers belong to the group of amorphous thermoplastic...
TRIBOLOGICAL PROPERTIES OF HYPEREUTECTOID ALLOY STEELS
Influences of the microstructure and material characteristics on tribological properties of hypereutectoid 80CrMoV4-3 and 90CrV6 alloy steels are considered in this paper. Investigations concerned steels, the application...
Ocena wybranych własności materiałowych polimerowej warstwy ślizgowej hydrodynamicznego łożyska wzdłużnego
Materiały polimerowe stosowane są coraz częściej jako warstwy ślizgowe łożysk hydrodynamicznych. Dzieje się tak dlatego, że wykazują one szereg zalet w porównaniu ze zwyczajowo stosowanymi warstwami ślizgowymi ze stopów...
STRESS ANALYSIS IN CERAMIC ROLLING ELEMENTS
Some ceramic materials have been found to have the optimum combination of properties that are suitable for rolling element bearing applications (high speeds, high loads, different environments). Cracks, structure defects...
BADANIE PROCESÓW ZUŻYCIOWYCH PŁYNU HAMULCOWEGO W ZŁOŻONYCH WARUNKACH WYMUSZEŃ
W pracy określono wpływ zwiększonej zawartości wody w płynie hamulcowym poprzez pomiar jego zawodnienia i temperatury wrzenia oraz badanie wpływu zużycia płynu hamulcowego na bezpieczeństwo i niezawodność układu hamulcow...