Accelerometer and EOG Based Wireless Gesture Controlled Robotic Arm
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2015, Vol 5, Issue 3
Abstract
This paper deals with the Robotic arm controlled by arm and eye movements, where data is acquired through the use of accelerometer and EOG amplifier. The hand movements are captured by the Accelerometer and the eye movements are captured by EOG amplifier. The Robotic arm will pick and place the object according to the movement of the hand and Robotic arm will move left and right according to our eye movements. Signals are wirelessly transmitted through RF Encoder and Decoder. Robotic arm is based on Arduino Duemilanove controller for signal processing, and interfaced with the Controller serially. This Embedded system will help disabled persons to do work by their own. The Robotic arm can be used to pick and place hazardous objects
Authors and Affiliations
S. Kalaimagal , A. Arun Raja
Keywords
Related Articles
- EP ID EP94914
- DOI -
- Views 124
- Downloads 0
An Experimental Investigation on Mode-II Fracture of Light Weight Pumice Aggregate Concrete
Shear strength is a property of major significance for wide range of civil engineering materials and structures. Shear and punching shear failures particularly in deep beams in corbels and in concrete flat slab...
Optimum Relay Selection for Energy-Efficient Cooperative Ad Hoc Networks
Abstract: The Cooperative Communication (CC) is a technology that allows multiple nodes to simultaneously transmit the same data. It can save power and extend transmission coverage. However, prior research work on...
Data and Information Integration: Information Extraction
Information extraction is generally concerned with the location of different items in any document, may be textual or web document. This paper is concerned with the methodologies and applications of information extractio...
Design and Fabrication of Vapour Absorption Refrigeration System [Libr-H20]
Most of the energies are utilized by the industries due to depletion of fossil fuels and increasing the fuel price to exploit the maximum presented energy from the waste heat source. The industry which utilizes steam tur...
Vibration control of newly designed Tool and Tool-Holder for internal treading of Hydraulic Steering Gear Nut
In the internal turning operation, vibration is a frequent problem, which affects the result of the machining and in particular the surface finish. There will be several different actions to consider when solvi...