Acid Aging Effects on Surfaces of PTFE Gaskets Investigated by Fourier Transform Infrared Spectroscopy
Journal Title: Tribology in Industry - Year 2016, Vol 38, Issue 3
Abstract
This paper investigates the effect of a prolonged acid and thermal attack, on the surface of PTFE by Fourier Transform Infrared Micro-Spectroscopy (FT-IR). The materials are commercialized by two alternative producers in form of Teflon tapes. These tapes are installed in process plants where tires moulds are cleaned inside a multistage ultrasonic process. In these cases, Teflon tapes, having a role of gaskets, show inexplicably phenomena of degradation in relatively short operation periods. Even considering that these gaskets are exposed to the combined effect of ultrasonic waves, temperature, humidity and acid attack, the PTFE properties of resistance nominally exclude the possibility of these severe erosion phenomena. An interesting explanation can be related to the potential presence in the cleaning solution, mainly based on sulfamic acid, of highly reactive chemical compounds, as chlorides and fluorides, originated by the disaggregation of elements from the tire composition and/or additives used as processing aids and/or by catalytic effect generated by fluorine produced by PTFE degradation. In general, up to 300 different chemical elements, both organic and inorganic, natural and synthetic, are merged in a tire. Since this composition is practically unknown, especially regarding additives and “unusual elements”, representing a secrecy of each tire manufactures, it is really complex to define the chemical composition of the cleaning solution with an appropriate precision. As a consequence, the gaskets have been treated with different mixtures of acids in the way to combine a larger range of possibilities. Thus, the FT-IR experimental characterization of PTFE surface properties followed an appropriate accelerated aging, aiming at actuating the specific mechanics of wearing as in industrial use. The different acid treatments adopted for accelerating the aging of gaskets have highlighted the different behaviour of the PTFE matrix, but also differences between manufacturers.
Authors and Affiliations
L. Giorgini , C. Fragassa , G. Zattini , A. Pavlovic
Keywords
Related Articles
- EP ID EP128641
- DOI -
- Views 86
- Downloads 0
Tribological Behaviour of Aluminum Silicon Carbide Functionally Graded Material
Al based Functionally graded materials (FGMs) are appropriate for wider range of applications in various sectors such as structural, aircraft and automotive industries. They are highly conductive, ductile, light in weigh...
Wear-resistance of Aluminum Matrix Microcomposite Materials
A procedure is developed for the study of wear of aluminum alloys AlSi7 obtained by casting, reinforced by TiC microparticles, before and after heat treatment. Tribological study is realized under conditions of friction...
Influence of Workpiece Hardness on Tool Wear in Profile Micro-milling of Hardened Tool Steel
Machining of engineering metallic materials on micro-level is very complicated. Micro-milling with solid tools, as one of microengineering technologies, is an acceptable process to machining of complex metallic micro-par...
Investigation of Friction Behaviors of Brake Shoe Materials using Metallic Filler
Some vehicles use brake shoe made from semi-metallic materials. Semi-metallic brake shoes are made from a combination of metallic and non-metallic materials. Metallic particles are added in the formulation of brake shoe...
Performance Characteristics of a Misaligned Single Pad Externally Adjustable Fluid-Film Bearing
Externally adjustable fluid film bearing has been devised whereby the hydrodynamic conditions can be changed as required in a controlled manner. Principal feature of the bearing is the facility to adjust its radial clear...