Acid Attack on Reinforced Concrete Incorporated with Industrial Wastes
Journal Title: JOURNAL OF ADVANCES IN CHEMISTRY - Year 2016, Vol 12, Issue 22
Abstract
The study was conducted to evaluate the durable characteristics of Reinforced Concrete with silica fume and copper slag. The concrete mix design was done for M40 grade concrete with 7% silica fume as cement and 10 to 30% of copper slag as sand. Also the concrete contains the total fiber content 3% of steel, basalt and Alkali Resistant Glass Fiber (ARGF). Â To study the durability characteristics such as resistance against acid, specimens were cast for different content of industrial wastes, fibers and it was compared with the control concrete.In this investigation an attempt was made in order to know the behavior of standard concrete of M40 grade specimens curing with acids such as HCl, and H2SO4 of 1% concentration at 28 days curing. Test results indicate that use of Silica fume, copper slag and fibers in concrete has improved the performance of concrete in durability aspect
Authors and Affiliations
Dhanaraj R, Sakthieswaran N
Keywords
Related Articles
- EP ID EP653009
- DOI 10.24297/jac.v12i22.2843
- Views 169
- Downloads 0
SYNTHESIS AND STUDY OF BIMETALLIC CATALYTIC SYSTEMS FORMED IN SITU BY ALUMINUM, 1, 2-DICHLOROETHANE AND Fe (III), Ni (II), Mn (II) CHLORIDES
Novel bimetallic catalytic systems based on the catalytic complex (CTC) are synthesized from the reaction of Al metal and 1, 2-dichloroethane in the mode of in situ and modified with the metal chlorides of Mn (II), Fe (I...
Green synthesis of Novel Schiff bases derived from 2, 6 diamino pyridine – Characterization and Biological activity
Present work produces an excellent green route for the synthesis of Schiff bases derived from 2, 6 diamino pyridine, by using lemon juice as the catalyst. This method is experimentally simple, quick, clean and high yield...
PERFORMANCE, EMISSION, NOISE AND VIBRATION CHARACTERISTICS OF BIOGAS –DIESEL DUAL FUEL COMPRESSION IGNITION ENGINE
For decades, four-stroke compression ignition engines prove to be indispensable in major sectors of transport, agriculture, etc., and it will be very difficult to completely replace these heavy-duty workhorses in upcomin...
Properties and bending behavior of Nickel coated Mild steel sheet during air bending
Springback refers to the elastic recovery which subject to a geometrical change when the metal undergoes deformation during the forming process. The experimental investigation of this paper is focused to analyze the beha...
CONSERVATIVE FLUIDS AND LUBRICANTS BASED ON TURBINE OIL, NITRO, AMIDO AND PARAFFIN WAX
To create conservation fluids and lubricants based on the oil acids and polyethylene polyamine (PEPA) synthesized amidoamines, and based on α-olefins (C12, C14 and C16-C18) and the nitric acids-nitro compounds. Using of...