Active traction converter with pulse-width modulation for AC electric locomotives with DC traction motors
Journal Title: Інформаційно-керуючі системи на залізничному транспорті - Year 2018, Vol 23, Issue 4
Abstract
One way to increase the energy efficiency of AC electric locomotives with DC traction motors is to use converters on fully controlled semiconductor devices. Power circuit and control algorithm of active traction converter with two-zone voltage regulation are developed in this article. As an algorithm for controlling IGBT-transistors, rectangular-stepped pulse width modulation with a carrier frequency of 1200 Hz is used. The simulation of the active traction converter is performed in MATLAB. The results of the experiments showed that the power factor of 2EL5 electric locomotive with a new converter is 0.83...0.99 over the entire range of loads. This is more than for a thyristor rectifier. The THDi of the contact wire current is up to 13%. In further research, we must focus on finding ways to compensate for the higher harmonics of the voltage and current of an electric locomotive under PWM voltage regulation.
Authors and Affiliations
O. Krasnov, V. Yagup
A neural network model of the control unit for noise-immune tonal track circuit
The article deals with a designed neuronet model of the control unit for an audio frequency track circuit which makes it possible to increase its noise stability by using the fine tuning of a guard time during which trac...
Investigation of vector control system for traction asynchronous electric power transmission of diesel train
The analyze with computer simulation of vector control system for traction asynchronous electric power transmission of the diesel train DEL-02 was conducted. The modeling of operating modes of the traction asynchronous e...
Multi-objective optimization Luby codes based on natural computing
In modern packet-switched telecommunications networks error correcting coding used at different levels of the Open Systems Interconnection model. At the physical and data link layers to correct and detect errors in packe...
The main advantages of separable programming for multidimensional problems
An essential component of innovative technologies in the theory of information measuring systems (IMS) and in their computer-aided design systems should be the result of solving problems of improving efficiency, optimizi...
Features of the application of the methodology for assessing the acoustic properties of a room using the example of a press center
The authors described the use of the methodology for assessing the acoustic properties of a room using an example of a room with special acoustic conditions. Substantiation of the sequence of acoustic examination stages...