ADVANCED STRATEGIES FOR INVESTIGATION OF INTERNAL COMBUSTION ENGINE
Journal Title: ROMANIAN JOURNAL OF TECHNICAL SCIENCES - APPLIED MECHANICS - Year 2018, Vol 63, Issue 1
Abstract
Due to several pressing matters like the drastic reduction in pollutant emissions and fuel consumption, as well as the need to increase the thermal efficiency, the research in the field of internal combustion engines running on conventional and unconventional fuels must use the newest investigation capabilities that can aid in overcoming these challenges. Currently there are many in-engine solutions that appear as promising in the development of future engines: dual fuel solutions (supplied to the engine cylinder either as blends or separately), a more precise control of the combustion in order to reach lower in-cylinder peak temperatures, compression ignition of gasoline or alcohols etc. and all these require sophisticated investigation methods. Even though, in the past years, a clear transition towards simulation could be noticed, the experimental part of the development process cannot be neglected just yet and one must combine the two methods in order to obtain progress. To this end, this paper presents novel investigations methods used in the TESTECOCEL laboratory (Testing laboratory for internal combustion engines that run on biofuels) of the Department of Automotive and Transports from the Technical University of Cluj-Napoca as well as some obtained results (through simulation and experimental).
Authors and Affiliations
Dan MOLDOVANU, DORU LAUREAN BĂLDEAN, NICOLAE VLAD BURNETE, BOGDAN MANOLIN JURCHIȘ
FORMULATION ANALYTIQUE DES EFFORTS DE REDUCTION AU DROIT DE L’INTERFACE FLUIDE-STRUCTURE DES BARRAGES RIGIDES A FRUITS COMPOSES SOUS EXCITATIONS SISMIQUES
Les barrages, constituent des ouvrages à caractère stratégique important. L’évaluation de leur sécurité parasismique requiert, entre autres, une détermination précise des pressions hydrodynamiques et par suite de la dist...
PERIODIC SOLUTION FOR DIFFERENTIAL EQUATIONS WITH SMALL PARAMETER
There is considered a class of non-linear differential equations and there is analysed the existence of the periodical solutions and the stability of this solutions for the case when the linear part is admitting periodic...
CONFERENCE REPORT: XXVIIIth ANNUAL SYMPOSIUM OF THE INSTITUTE OF SOLID MECHANICS SISOM 2017 AND SYMPOSIUM OF ACOUSTICS, BUCHAREST, MAY 18–19, 2017
The XXVIIIth Annual Symposium of the Institute of Solid Mechanics SISOM 2017 and Symposium of Acoustics was held in Bucharest, from 18 to 19 May 2017. The general website of this symposium is: http://www.imsar.ro/html/_s...
MULTI-SCALE CRYSTALLINE PLASTICITY FINITE ELEMENT ANALYSIS OF TEXTURE EVOLUTION IN DRAWING PROCESS
The crystallographic control technology in the aluminum wire drawing process is a key technology in the aluminum industries, which produces high-strength bars and wires for the electric, automotive and aircraft parts. A...
INCREMENTAL NUMERICAL METHOD USED FOR THE KINEMATIC ANALYSIS OF THE FOUR-BAR LINKAGE MECHANISM
Kinematics deals with the study of geometrics aspects of the movement without taking into consideration the mass of the rigid solids (their inertia) and neither the causes that provoked the movement namely the forces. Th...