АКУСТИЧНИЙ ГАЗОАНАЛІЗАТОР
Journal Title: Вимірювальна техніка та метрологія - Year 2018, Vol 79, Issue 2
Abstract
Method of measuring the relative component concentrations of two and three-component gas mixtures is proposed. The dependences of the sound velocity on the molar mass, the relative concentration, the heat capacity at constant pressure, the heat capacity at a constant volume and the absolute temperature of the gases in the mixture form the basis of the method. To improve accuracy, the change of measuring the speed on the measuring the frequency is proposed. It is shown that at constant wavelengths the frequency increases linearly with sound velocity at the gas mixture in the acoustic resonator. The program algorithm was created with the help of Mathcad 2001 Professional. It permits the determination of three component gaseous mixture concentration at the measured frequency. First, the frequency value inherent to this mixture is compared with the values in the table. Two closest values are selected. The change in relative concentrations of gases is determined by these values. This change is split into 10 intervals. The frequency values for each interval are calculated. These frequencies are compared with the measured values. Again, there are two closest values and the cycle is repeated. In such a way the nearest frequency increment band is narrowed in 3-orders magnitude after three iterations. Change in the concentration of particular gases could be 80% between the adjacent rows of the table. Reached value of gas concentration is one thousand times smaller than the band (0.8%) after the third iteration. The number of iterations is unlimited for this algorithm and is given in advance. The two main factors affect the accuracy of measurements. They are the quality and the noise of the auto generator. The most common definition of Q is the ratio of the energy accumulated in the oscillation to the losses of this energy. This definition determines the design of an acoustic resonator. It should be such that the acoustic oscillations in it do not lose energy. This is necessary to ensure a high-quality resonator.
Authors and Affiliations
Volodymyr Rak, Yaroslav Lutsyk
Keywords
Related Articles
- EP ID EP531541
- DOI 10.23939/istcmtm2018.02.013
- Views 74
- Downloads 0
ШЛЯХИ РОЗВИТКУ СТРУКТУРИ СИСТЕМИ УПРАВЛІННЯ ЯКІСТЮ ПРОДУКЦІЇ ТА ПОСЛУГ
Quality management system as the four subsystems – producing; measurement, analysis and improvement; principal responsibility; and resource management – is proposed on the basis of considering the production quality a...
ПІДХОДИ МОДЕЛЮВАННЯ В ОЦІНЦІ ЯКОСТІ ФАСОВАНИХ ВОД
Modeling algorithm for the method of the water quality complex evaluation are proposed.
КОНЦЕПЦІЯ БЕЗДЕМОНТАЖНОЇ САМОПОВІРКИ АНАЛОГО-ЦИФРОВИХ ПЕРЕТВОРЮВАЧІВ В ПРОЦЕСІ ЕКСПЛУАТАЦІЇ
The article analyzes the state of the art of providing the unification of measurement channels based on analog-digital converters (ADC). Also there is justified the expediency of development the embedded self-testing sub...
МОЖЛИВОСТІ МЕТРОЛОГІЧНОЇ ПЕРЕВІРКИ ІНДИВІДУАЛЬНИХ ЛІЧИЛЬНИКІВ ТЕПЛА НА МІСЦІ ЕКСПЛУАТАЦІЇ
Concept of the metrological supply formation of commercial individual head counters at the exploitation place without mounting is considered.
ВПЛИВ СТАНУ ДОСЛІДЖУВАНОЇ СИСТЕМИ НА ДИСПЕРСІЮ РІВНОТОЧНИХ ВИМІРЮВАНЬ
This paper presents the results of equivalent measurements of electrical resistance of two identical resistive coils. It is suggested that the difference between the RMS of investigated coils is formed as result of their...