钪对铸态Al-Cu-Mg-Ag-Zr合金组织与性能影响

Journal Title: Science Paper Online - Year 2009, Vol 4, Issue 4

Abstract

采用熔炼铸造方法,制备了不同Sc含量的Al-Cu-Mg-Ag-Zr合金。通过金相、扫描电镜、透射电镜、性能测试等实验方法,研究了Sc对铸态Al-5.3Cu-0.8Mg-0.6Ag-0.2Zr(质量分数,%)合金的组织和性能影响。结果表明,添加0.10 %~0.5 % Sc后,在室温到300 ℃测试范围内,合金的室温拉伸强度、高温耐热性能及晶界腐蚀性能得到了改善。添加0.3%~0.5%Sc明显细化铸态合金的晶粒,晶粒尺寸从平均300 μm降低到60 μm。同时,添加0.3 % Sc有助于提高铸态合金的室温与高温拉伸强度,改善合金的抗腐蚀性能。含0.3% Sc的Al-5.3Cu-0.8Mg-0.6Ag-0.2Zr合金的力学性能得到提高的原因是由于细晶强化、固溶强化、时效强化、弥散强化及晶界强化共同作用的结果。同时研究也表明,当合金中同时添加0.5% Sc时,铸态合金中形成了粗大的Al3(Sc, Zr)相稀土化合物相,这种化合物相严重降低了合金的拉伸性能与抗腐蚀性能。

Authors and Affiliations

Daihong Xiao, Min Song, Fuqin Zhang, Kanghua Chen

Keywords

Related Articles

Effect of using cooling and lubrication method with <br /> oils on water in cutting<br />

Cooled air,minimum botanic or ester oils and little water are used to form new cutting fluids of oils on water (OoW) by means of combined mist-jet. The paper speaks the cooling and lubrication method of OoW, and compare...

Product style recognition and design based on style module

The paper first summarized the methods of product style design. Based on the summary, a style recognition and design technique based on style module is presented. In this technique, the constraints between im-style featu...

血藤对口腔细菌致龋性影响的实验研究

目的:通过体外系列抗龋实验研究血藤对口腔细菌生长、产酸、产胞外多糖的影响,探讨血藤是否能有效调节口腔菌群生态平衡。方法:测定血藤对三种龈上菌斑优势菌——变形链球菌、粘性放线菌和血链球菌的最低抑菌浓度MIC。再测定低于MIC的4个...

An appraisal model of analytic hierarchy process for<br /> college entrance examination<br />

By using the model of Analytic Hierarchy Process, analysis and appraisal are given for the College Entrance Examination (CEE) system. The AHP is a kind of practical method of handling with the problems that are hard to t...

Digital Yellow River Model

Soil erosion is one of the key concerns in land use management for the Loess Plateau of the Yellow River, where serious soil loss is the root cause of environmental and ecological degradation of the basin. In this paper,...

Download PDF file
  • EP ID EP96844
  • DOI -
  • Views 155
  • Downloads 0

How To Cite

Daihong Xiao, Min Song, Fuqin Zhang, Kanghua Chen (2009). 钪对铸态Al-Cu-Mg-Ag-Zr合金组织与性能影响. Science Paper Online, 4(4), 239-242. https://europub.co.uk./articles/-A-96844