AN ANALYSIS OF THE ELECTROMAGNETIC PROCESSES IN THE INDUCTOR SYSTEM – TOOL OF THE STRAIGHTENING OF CAR BODIES
Journal Title: Електротехніка і Електромеханіка - Year 2015, Vol 0, Issue 2
Abstract
Introduction. One of the promising directions of electromagnetic forming (EMF) is a contactless magnetic-pulse straightening of the automobile bodies. The efficiency and the quality of the straightening depend on design and operating principle of the straightening tool. In the modern technique of EMF a large number of the tools - inductor systems (IS) is used in different configurations with uneven distribution forces on the treatment object that in turn does not meet the needs of the effective process of straightening. There appears the urgent necessity to create IS with high uniformity of the induced field and a high concentration of attracting forces in the working area of the tool. The most effective IS are the Inductor Systems with an Attracting Screen (ISAS). One of the most important considerations when choosing a particular design ISAS is the study of the electrodynamics processes with definition of excited loads. The nature and the course of the electrodynamics processes in accordance with design features determine the effectiveness and the efficiency of the ISAS. Therefore, in ISAS an additional coil for the concentration of the attracting forces in the working area should be entered. Purpose. The numerical analysis of the induced fields and the currents in the experimental models of ISAS with an additional coil was made. Methodology. In the idealization of the «extremely low» frequencies of existing fields, there were received rated dependences for density of the induced currents and distributed attracting force in ISAS and the external additional coil, through the use of the calculated model in the cylindrical coordinate system. Results. Insertion of the additional coil placed over the accessory screen allows to concentrate and increase the amplitude of the attracting forces in the central part of the working area of the inductor system. Practical value. 1. Numerical analysis of fields and currents in experimental models of Induction Systems with Attracting Screen (ISAS) and additional coil, designed to align the metal coatings of vehicles was made. 2. It is shown that if in ISAS they insert additional coil placed over the accessory screen significantly increases the amplitude of excited forces of attraction. 3. It is shown that the parallel connection of the primary and additional coils in ISAS allows to concentrate the forces of attraction in the centre of the working area of the tool for straightening automobile bodies.
Authors and Affiliations
Yu. V. Batygin, E. A. Chaplygin, S. A. Shinderuk
Keywords
Related Articles
- EP ID EP301234
- DOI 10.20998/2074-272X.2015.2.10
- Views 75
- Downloads 0
APPLICATION OF A RELATIVE TECHNICAL LEVEL INDEX METHOD TO INDUCTION MOTOR OPTIMIZATION PROBLEMS
On the basis of a method of relative technical level indices with relative geometric controlled variables, analytical expressions are derived to determine the optimum geometric dimensions of the squirrel-cage induction m...
NEW APPROACHES AT CONSTRUCTION OF MAGNETIC CONDUCTORS FOR MAINS TRANSFORMERS
It is carried out exploration and the assaying of new approaches at construction of stacked laminated cores of mains transformers which consists in simultaneous application in a magnetic conductor of the anisotropic and...
RESEARCH INTO METHODS OF PIPE END DEMAGNETIZATION UNDER MAIN PIPELINE REPAIR
Efficiency of pipe end demagnetization methods is experimentally investigated to avoid arc magnetism at repair welding jobs on main pipelines. It is found that multi-polar biased static and dynamic demagnetization provid...
EFFECT OF A DIELECTRIC BARRIER ON THE ELECTRIC FIELD DISTRIBUTION IN HIGH-VOLTAGE COMPOSITE INSULATION OF ELECTRIC MACHINES
Introduction. Modern high-voltage systems for composite insulation of electrical machines consist of tape glass mica paper materials (dry or pre-impregnated). The electrical characteristics of a multilayer composite insu...
SYNTHESIS OF A TWO-MASS ELECTRIC DRIVE WITH AN ASTATIC SYSTEM OF SUBORDINATE REGULATION AT THE ACTION OF VARIABLE FRICTION FORCES
Purpose. The solution of actual problem of active suppression of resilient electromechanical vibrations in an electric drive with the astatic system of automatic control is presented. Methodology. For research of damping...