AN ANALYSIS OF THE MOTOR LIFE PROFESSIONAL OPERATING PREPARATION APPLICATION POSIBILITY IN MARINE DIESEL ENGINES
Journal Title: Tribologia - Year 2010, Vol 233, Issue 5
Abstract
Lubricating oils are characterised by improving the quality of the operation engines. Nevertheless, in extreme working conditions of the tribological systems (high pressures, velocities and temperatures, temporary lubricating lack during starting) the machine elements are not secured enough. In connection with the abovementioned problem, the idea to introduce an additional substance operating preparation into tribological systems (with the lubricating oils) was put forward. The chemical interactions of preparations have wide application. These preparations join permanently with lubricating oil, so they do not precipitate on the filters and do not create heat-insulating layers. The chemical interaction preparations improve antiwear and antiseizure properties considerably. Lubricating oils used in marine engines are purified filtering. In connection with this, the question arises if the operating preparations (which have higher density then oils and water) are able to join permanently with lubricating oil in order not to separate in the purifying process and what influence they have on lubricating oil ability to separate the water. The lubricating oil with operating preparation Motor Life Professional and water purifying research were presented in the article so as to answer the above questions.<br/><br/>
Authors and Affiliations
Andrzej Młynarczak
Keywords
Related Articles
- EP ID EP516861
- DOI -
- Views 48
- Downloads 0
PRELIMINARY EXPERIMENTAL RESEARCH OF TRIBOLOGICAL PROPERTIES OF BUS BRAKES FRICTION LININGS
Experience gained from the use of buses in urban conditions showed that the working conditions of friction elements of the braking system, ensuring traffic safety, are associated with high loads. This leads to the intens...
RESEARCH ON STRUCTURES AND WEAR PROCESSES OF HARD SURFACE LAYERS IN A SOIL ABRASIVE MASS
The paper presents the analysis of the process of the wear, using the unit wear rate, of hard surface layers with different structures in a gravel and loamy abrasive soil mass in two states of moisture, dry and wet. Test...
WŁAŚCIWOŚCI TRIBOLOGICZNE STALI ŚREDNIOWĘGLOWEJ Z POWŁOKĄ HYBRYDOWĄ TYPU Cr/CrN, WYTWORZONĄ METODĄ PVD
W pracy omówiono wyniki badań budowy, mechanicznych i przeciwzużyciowych właściwości powłok hybrydowych typu Cr/CrN, składających się z chromu i azotku chromu, wytworzonych na powierzchni stali średniowęglowej C45 metodą...
WPŁYW STĘŻENIA CZĄSTEK MAGNETYCZNYCH NA WARTOŚCI PARAMETRÓW EKSPLOATACYJNYCH W POPRZECZNYM ŁOŻYSKU ŚLIZGOWYM SMAROWANYM FERRO-OLEJEM
W niniejszej pracy została przedstawiona analiza zmian podstawowych parametrów eksploatacyjnych poprzecznego łożyska ślizgowego w aspekcie stężenia cząstek magnetycznych w ferro-oleju będącego czynnikiem smarującym. W pi...
EVALUATION OF INTERACTIONS BETWEEN ECOLOGICAL LUBRICATING AND ANTIOXIDANT ADDITIVES IN A SYNTHETIC OIL BASE
The paper presents the results of the research concerning the lubricant properties and thermooxidation stability of synthetic polyester lubricant containing additive lubricant (PE) and antioxidants (tocopherols and comme...