An Analysis Of The Road Network Performance In Area Faculty Of Engineering Hasanuddin University Gowa
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 3
Abstract
A campus is a center of educational activity that has a high activity on the movement of vehicles. The existence of the Campus Faculty of Engineering Hasanuddin University Gowa affects to the flow of human movement and cause the attraction of the trip, which implies the increase in traffic volume and level of service road. A study of the performance of Malino axis road due to the existence of the Campus Faculty of Engineering Hasanuddin University Gowa. This research aims to explain the performance of the road network in area Faculty of Engineering Hasanuddin University Gowa and traffic handling strategy. The analysis shows that the flow of vehicles entering the campus will burden the road to Malino by 12% -15%, while the exit vehicles will increase the traffic load on the toll road to Sungguminasa by 12% -13.5% of the total number of vehicles, currently the degree of saturation the road of Malino axis road 0.56 with the level of service classified C. In year 2023 to 2025 predicted the level of Malino axis road service decreased (category D) with the degree of saturation 0.77 - 0.88 make the traffic flow is unstable due to high traffic volume. Malino axis traffic volume approaches planned road capacity in 2026 with a saturation degree for 0.94 (service level E). Moving heavy vehicle operating hours across the peak hour due to C excavation activities, increasing road width, and maximizing the Bus Rapid Transite (BRT) as a public transport mode is a handling strategy to maintain road network performance.
Authors and Affiliations
Sari Utami Ramdani, Baharuddin Hamzah, Jamaluddin Rahim
Keywords
Related Articles
- EP ID EP437914
- DOI 10.9790/1684-1503022631.
- Views 91
- Downloads 0
Static Model And Analysis of Micro Gas Turbine Using Autodesk Inventor And Autodesk Nastran Software
In this project development of Micro gas turbine with three different materials are tested and designed using Autodesk inventor and Autodesk nestron software. Generally micro gas turbine is a size so they are compactable...
Parametric Study of Laterally Loaded Pile Foundation
The pile foundation is an effective foundation system commonly used to support high rise buildings. The use of pile foundation tends to reduce the chances of displacement. In conventional analysis & design of laterally l...
Stakeholder Knowledge of Sustainable Road Implementation In Buru Regency
Sustainable road development is an activity for the planning, implementation and use of environmentally friendly road construction products, efficient in resource use, low cost and with due consideration to the principle...
Study of Using Sum to Improve Digital Archives Integrity of Traditional Architectures with 3D Laser Scanning Technology
3D laser scanning technology has been widely applied to digital archive and management of historical buildings, and that is enormous contributions for human civilization inherited. But the technology is limited by comple...
Mathematics in Welding Design
The purpose of this paper is to show the importance of the welding calculations before the start in any projuct or making a ptroduct that involve a welding jop.