An Experimental Study of Modal Parameter of Cantilever Beam with Various Cracked Condition
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 3
Abstract
Use of beams in construction industries as well as in different engineering application is obvious. When this beam undergoes in different types of loading, crack may generate in beam. Crack is main cause for failure of beam like structure. Crack changes the physical and dynamic properties like stiffness and natural frequencies of beam which are function of crack depth and crack location. In this study vibration analysis of cantilever beam has been done under damaged and undamaged condition to investigate the effect of crack on natural frequency. Numerical analysis of beam is done through finite element analysis of beam using ANSYS software. Vibration analysis of beam has been also done through experimentation and results are compared with analytical analysis and it hold well. Different crack location with single as well as with multi cracks are considered in this paper and results are compared with without crack beam results.
Authors and Affiliations
Mr. Pramod Kumar, Dr. Sankha Bhaduri, Dr. Arbind Kumar
Keywords
Related Articles
- EP ID EP21723
- DOI -
- Views 240
- Downloads 4
Analysis of Casting Defects using Casting Simulation Technique and Using Design of Experiment: A Review
Computer simulation of casting process has emerged as a powerful tool for achieving quality assurance without time consuming trials. Software packages for simulating the solidification of molten metal in the mould enabl...
Android Beam
Android Beam is a Near Field Communication (NFC) implementation that allows two Android mobile devices to transfer data between each other. Android Beam is a feature of the Android mobile operating system to allow data...
Effective Power Generation Using Foot Step and Road Hump For Intelligent Street Light
In the present day scenario, power is a major need for human life. There is a need to develop non- conventional sources for power generation due to the reason that our conventional sources of power are getting scarcer d...
Effects of Process Parameters on the Microstructural Properties of MIG and FSW Joints
The present research work is undergone to investigate the effect of weld parameters on the microstructural behavior of metal inert gas welding (MIG) and friction stir welding (FSW) joints. The selection of process param...
Performance of High Concentrator Photovoltaic System
A concentrating photovoltaic (CPV) system converts light energy into electrical energy in the same way that conventional photovoltaic technology does. There are two main types of concentrating optical systems in use tod...