AN OPTIMAL DESIGN OF CONNECTIVITY OF THE ELECTRIC CURRENT TO A STAND-ALONE COMPLEX BY USING THE SOLAR CELLS
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 4
Abstract
In recent days, the increasing demand for electrical energy has led to a significant need for power for the renewable energy. Producing the electric current from the Solar Energy (SE) is one of the best sources of renewable energies. The most significant problem facing designers of (SE) systems for individual buildings is the problem of lack of flat roof areas of these buildings, especially in the stand-alone systems where the solar panels take a considerable amount of space. Therefore, most scientific research in the field depends on "How to reduce the solar panel area with a high efficiency and power production." It is also possible that the available area gives a large surplus of useless energy. The problem of the vast horizontal areas of solar panels can be solved in the stand-alone systems, where each solar system installed on every building feeds that same building and feeds its surplus energy in main busbar around the complex. The main busbar around the complex provides each building with the required energy and uses the surplus energy from all buildings to provide another load. This paper introduces a complete design system of integrating photovoltaic/battery storage to a stand-alone complex isolated about the utility grid system "Off Grid system” with variety and different loads by using distributed solar cells to reach the highest efficiency and economical operation of the distribution system.
Authors and Affiliations
KHALID. M HAMID, AHMED S ADAIL, SALAMA. A ABO-ALELA, ELGAZZAR M. M
Keywords
Related Articles
- EP ID EP430518
- DOI -
- Views 71
- Downloads 0
DESIGN AND DEVELOPMENT OF SPR INSTRUMENT BASED ON Ө-2Ө MECHANICAL INTEGRATION TECHNIQUE
Surface Plasmon Resonance (SPR) instrument is an important tool in the field of biomolecular interaction studies. The SPR instrument is basically an optical measurement technique and its construction is very complex. The...
Operational and Design Parameters of Unified Vehicles
The purpose of the article is to summarize and analyze the problems of design and operation of heavy trucks and semi-trailers in difficult road conditions and on terrains, subject to severe wetting. The state of knowledg...
Effect of Co2 Laser on Some Properties of NI46TI50CU4 Shape Memory Alloy
The microstructure, mechanical and corrosion properties of Nickel-Titanium-Copper shape memory alloy were studied in this paper. The Ni46-Ti50-Cu4alloy was prepared using the powder metallurgy technique, and then mixed a...
Investigation of Machining Parameters By Using PVD Coated TiIAlLN
AISI D2 steel is the leading candidate material used in dies for the production of automobile products and electronic parts. The machinability of the material involves tool life, cutting forces, chip formation with less...
A Study of The Effect of Lean Six Sigma’s Critical Success Factors in Indian SMES
Small and Medium Enterprises (SME) are becoming an important part of the global economy by providing huge employment opportunity and stable support to GDP growth to many of the countries. SMEs face difficulty to compete...