An Optimal Gated Integrator Circuitrybased On Dummy Switch,For High-Resolution Energy Spectroscopy.
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2018, Vol 13, Issue 2
Abstract
Modern experiments in the physical sciences use electronics to monitor, digitize and store analog signals. We will consider the analog front-end of ion beam detector whose job is to solve the ballistic deficit problem by integrating the signal until all the charge is collected from the detector. Such a circuit is called Gated Integrator. The key element that actually stores the analog signal is a capacitor. The stored signal is damaged by noise due to charge injection, clock feedthrough and leackage current. Several works have been done to prevent these noises. In this paper, to ensure nonlinearity of the Gated integrator less than 0.03%, a novel circuit based on two switch transistors, to cancel the leakage current in the reset switch, is added with a dummy switch,which allows toreduce the charge injection up to 0.6mV.
Authors and Affiliations
Folla Kamdem Jérôme, Wembe Tafo Evariste, Djamet Yimga Arnaudand, Essimbi Zobo Bernard
Energy Meter Monitoring Over Internet of Things
The Existing domestic Energy meter reading systems universally exist many problems, such as difficulty in construction, too narrow bandwidth, too low rate, poor real time, not two way communication quickly etc. To solve...
Design and Implementation of Astable Multivibrator using 555 Timer
The 555 timer is widely used as IC timer circuit and it is the most commonly used general purpose linear integrated circuit. It can run in either one of the two modes: Monostable (one stable state) or Astable (no stable...
Hybrid PSO-GSA Applied To Dynamic Economic Dispatch With Prohibited Operating Zones
This paper proposes a novel and efficient hybrid algorithm based on combining particle swarm optimization (PSO) and gravitational search algorithm (GSA) techniques, called PSO-GSA. The core of this algorithm is to combin...
Fractional order PID Controller: Design and Comparison with Conventional PID Controller for the Robust Control of DC Motor using Fuzzy SMC
This paper presents a robust control of DC Motor using fuzzy sliding mode control scheme and the additional Fractional PID controller. The additional controller relaying on the sliding-mode theory is used to improve the...
A Solar-Photovoltaic Grid Interface Systemusing Smc Based On Lyapunov Function
A sliding mode control technique (SMC) is used for achieving maximum power point tracking (MPPT) control of solar-PV array. The Lyapunov function-based control technique is designed and developed for the DC-AC inverter t...