An Optimization of High Pressure and Temperature of SYNGAS in Underground Coal Mines by using CFD Analysis of Membrane Serpentine Tube
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 1
Abstract
The membrane serpentine tube heat exchanger is very useful for various applications such as aerospace, automobile, gas turbine power plants, chemical reactors and other industries, etc. This research deals with the thermal analysis of heat transfer for flowing fluid through tubes using ANSYS FLUENT R18.0. This membrane serpentine tube heat exchanger arrangement can provide aids a large transfer heat area in a small space with coefficients of heat transfer is high. For the construction of membrane serpentine tube heat exchanger, copper is choosing. Syngas is flowing through the conduit and also at the outer shell of the winding tube heat exchanger. In this precise research, an effort is made to evaluate the effect of Optimization of High Pressure and Temperature of Syngas in Underground Coal mines from a membrane serpentine tube heat exchanger, where the cold fluid flows on the tube and the Syngas flowing in the cell of the membrane serpentine tube heat exchanger.
Authors and Affiliations
Sagar S. Gaddamwar, Anand N. Pawar, Pramod A. Naik
Keywords
Related Articles
- EP ID EP464122
- DOI 10.24247/ijmperdfeb201960
- Views 60
- Downloads 0
Compare the Experimental Performance of V-shaped Black Cotton and Jute Cloth Floating Wicks Solar Stills in Indian Climatic Condition
The single basin single slope conventional solar still gives less amount of distillate output. Therefore, some modifications are proposed for conventional solar still in order to improve the performance and increase the...
Preparation of Al6061-Sic- Bagasse Ash MMCS By Using Stir Casting Method and Evaluation Microstructural, Mechanical Properties and Numerical Analysis
Metal Matrix Composites are promising materials for automotive, advanced structural, defense, marine, aviation, and applications, aerospace and other related sectors due to their tremendous combination of properties. The...
A Structural Analysis of a Connecting Rod using FEA
The project mainly deals with the design, analysis and manufacture of connecting rod. The connecting rod is an integral part of reciprocating engines, reciprocating pumps, gas compressors and pneumatic cylinders among ot...
THICKNESS EFFECT OF DCB SPECIMEN ON INTERLAMINAR FRACTURE TOUGHNESS IN CARBON/EPOXY COMPOSITES
In this work, the influence of specimen thickness on interlaminar fracture toughness in delamination of unidirectional carbon/epoxy laminates is presented. Specimens of three different thicknesses: 3.99, 5.27 and 6.65 mm...
DIE STRESS OPTIMIZATION USING QUANTUM BEHAVED PARTICLE SWARM OPTIMIZATION
In metal-forming industries, die is an important tool for fabrication of metal – formed products. Die service life, which is defined as the maximum product number produced by die before it fails, and die performance dire...