Analisis emisi gas buang dan daya sepeda motor pada volume silinder diperkecil
Journal Title: Dinamika Teknik Mesin - Year 2018, Vol 8, Issue 1
Abstract
This research aims to determine the effect of variations diameter pistons on exhaust emissions and fuel consumption. This research used a gasoline engine single-cylinder four-stroke with variations in cylinder volume 100 cc, 90 cc, 60 cc and engine rotation 1500 rpm, 2500 rpm, 3500 rpm, 4500 rpm, 6000 rpm. Data was collected in transmission N, 1, 2, 3, and 4 each of the three repetitions for each round engine rotation, using a gas analyzer 2400 ultra 4/5 IM Hanatech brand for exhaust emission of CO and HC. Based on data analysis, it can be concluded that with decreasing diameter of piston up to 60 cc can reduce exhaust emissions, especially CO, HC and fuel consumption. The highest HC exhaust emissions was in 100 cc cylinder volume that is equal to 514.33 ppm while the lowest HC emissions obtained in 60 cc cylinder volume at 49.67 ppm. The highest CO emission was obtained on 100 cc cylinder by 4.64% volume, while the lowest CO emission was obtained on 60 cc cylinder by 0.31% volume. The highest CO2 emissions obtained in 60 cc cylinder amounted to 17.60% volume, while the lowest CO2 emission obtained at 100 cc cylinder amounted to 8.37% volume, and the highest fuel consumption obtained in 100 cc cylinder at 0.65 kg/h, and the lowest fuel consumption obtained in 60 cc cylinder by 0.06 kg/h.
Authors and Affiliations
IM Mara, IMA Sayoga, IGNK Yudhyadi
Keywords
Related Articles
- EP ID EP250034
- DOI -
- Views 73
- Downloads 0
Optimasi kekuatan tarik komposit polyester diperkuat serat sisal dengan filler serbuk gergaji kayu sengon menggunakan metode respon surface
Composite is an engineering material, which is made from combination of two or more different materials into a new material with new properties. The aim of this research is to investigate optimum composition of sisal fib...
Pengaruh sudut kemiringan atap seng dan plastik gelombang terhadap tingkat kebisingan akibat air hujan
Zinc and plastic roofs are used vary widely in poor society because of their low price and their installation easiness. A roof installation with an inclination angle is done in order to the rain water is easy to flow. Ra...
STUDI KELAYAKAN PENGGUNAAN MESIN DIESEL DENGAN METODE BREAK EVEN POINT (BEP) DAN ANALISIS SENSITIVITAS PADA PLTD (Studi Kasus : PT PLN Persero Sektor Pembangkitan Lombok PLTD Ampenan)
This study intended to analyze the feasibility of the use of the Power Plant (PLTD) of Ampenan using the break even point (BEP) and sensitivity analysis. That there are several alternatives that can be taken are: first,...
KAJIAN TEKNO EKONOMI UNIT ALAT PENCACAH PLASTIK UNTUK MENINGKATKAN NILAI JUAL SAMPAH PLASTIK: STUDI KASUS-UD. SARI PLASTIK LOMBOK TIMUR, NTB
Processing plastic waste in East Lombok mostly just collect plastic waste processing and then sent to the city in its original form. If the plastic waste is processed by applying plastic shredded units or chopper machine...
PENGARUH KOMPOSISI BRIKET BIOMASSA KULIT KACANG TANAH DAN ARANG TONGKOL JAGUNG TERHADAP KARAKTERISTIK BRIKET
Energy crisis in the world especially from fossil fuels which caused by the depletion of non-renewable petroleum reserves. It is therefore necessary to find sources of alternative fuels that are renewable. Biomass is a s...