Аналіз сучасного досвіду проектування будівель із застосуванням трубобетоних елементів
Journal Title: Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва" - Year 2016, Vol 0, Issue 844
Abstract
The thesis is devoted to the analysis of existent constructive forms of joint of concrete filled tube columns to various types of ceilings, their advantages and disadvantages. The actual tendencies, which react on introduction concrete filled tube constructions into civil engineering, were identified. The trends of practical appliance of concrete filled tube and steel reinforced concrete constructions were investigated. The model of reinforced concrete ceiling comparative calculation in case of rigid and link connection to concrete filled tube column were conducted. The four main quality parameters of effectiveness of joints of concrete filled tube columns to ceiling constructions constructive forms were inducted, such as: creation of girderless frames, bearing the negative moment beside the support by construction of joint, creation the rigid three-dimensional frame and including the concrete core of column in work. The analysis of constructive form of joint concrete filled tube columns with girder and ceiling slabs in relation with stiffness of joint and including the core of concrete filled tube in work were conducted. Based on analysis of prevailing joints of concrete filled tube columns with varied types of ceiling expediency of investigating the rigid joint of concrete filled tube with sitecast steel reinforced ceiling, which distinguish by respond the four main quality parameters of effectiveness, were identified.
Authors and Affiliations
V. Kushchenko, Yu. Galushchak
Keywords
Related Articles
- EP ID EP230885
- DOI -
- Views 97
- Downloads 0
TO THE QUESTIONNAIRE OF THE OPERATING CONDITION OF SPAN CONSTRUCTIONS OF ROAD BRIDGES IN WESTERN AREAS OF UKRAINE
By using the examples of large – scale inspections of iron – concrete bridges the defects and damaqes of elements, the degradation of structural materials are shown. The examples of structure imperfection, tipical defect...
MECHANICAL AND PHYSICAL PROPERTIES OF LOW-ENERGY MULTICOMPONENT CEMENTS
One of the main tasks of building industry is to reduce carbon dioxide emissions, which are generated during the cement production, without losing the properties and quality of the binding agent. Production of composite...
CHARRING DEPTH OF FIRE PROTECTED STUDS IN TIMBER FRAME WALL ASSEMBLIES EXPOSED TO FIRE
The present standards do not consider cases for timber elements covered with fire- resistant penetrating coatings and jointed claddings simultaneously. This article is focused on the influence of such combined fire prot...
НАНОМОДИФІКОВАНІ ШВИДКОТВЕРДНУЧІ БЕТОНИ, АРМОВАНІ ДИСПЕРСНИМИ ВОЛОКНАМИ
It is shown that one of the innovative ways of obtaining of Rapid-hardening concretes with enhanced performance for fortifications is the use of nanotechnology techniques related to the directed process of structure form...
Оцінка енергетичного потенціалу сезонного теплового акумулятора для пасивних будинків
Every year in Ukraine the demand for passive houses is increased. The passive houses are characterized by specific consumption of thermal energy for heating system up to 15 kWh/(m²*year). The solar power is the most prom...