ANALYSES O F THE INFLUENCE OF CUTTING PARAMETERS FOR WEAR OF HEAD BLADE MILLING BY MACHINING OF COAL MATERIALS WPW-65
Journal Title: Tribologia - Year 2009, Vol 228, Issue 6
Abstract
This article presents the results of analysis which have been carried out in industrial terms, concern wear intensity of knife blades of milling heads by machining of coal blocks. Blocks are carried out on materials WPW-65, intended for lining of the crucible of a blast furnace, are characterized high grindability, and this cause that wear intensity of abrasion tools are high. The analysis also concerned the influence of speed and feed for the intensity of abrasion wear. We determined periods of blade duration for admitted criterion of wear and volume output.<br/><br/>
Authors and Affiliations
Stanisław Krawczyk, Krzysztof Zagórski
Keywords
Related Articles
- EP ID EP517048
- DOI -
- Views 57
- Downloads 0
FUNCTION OF THE MENISCI IN THE LOAD TRANSFER WITHIN THE KNEE JOINT
The aim of the study was to conduct strength analysis of a knee joint in order to experimentally determine the destructive fatigue loading under the conditions of cyclic compression. Animal joints were used as the study...
PROTECTION OF STEAM TURBINE BLADES AGAINST EROSION BY USING LASER CLADDING
In this study, the problem of steam turbines’ blades erosive destruction is analysed. The currently used methods of blade protection using stellite 6 protective plates is outlined in this study. The advantages of this me...
ANALYSIS OF MICROMECHANICAL AND TRIBOLOGICAL PROPERTIES OF nc-WC/a-C AND nc-WC/a-C:H NANOCOMPOSITE COATINGS
In the article, micromechanical and tribological properties of nanocomposite coatings nc-WC/a-C and nc-WC/a-C: H were presented. Coatings were deposited by magnetron sputtering on baseline and oxigen-hardened Ti6Al4V tit...
THE STRUCTURAL PROPERTIES AND RESISTANCE TO ABRASIVE WEAR IN SOIL OF CREUSABRO STEEL
The paper presents the results of abrasive wear resistance tests on Creusabro 4800 and Creusabro 8000 steel. The results obtained for laboratory samples were referred to the structure of the examined types of steel and t...
ASSESSMENT OF TRIBOLOGICAL PROPERTIES OF GEAR OILS
The results of the tribological test of fresh and used gear oils and model-polluted oils (containing water and solid substance) are presented in this paper. The scuffing load was determined in an updated Four-Ball machin...