ANALYSIS AND EVALUATION OF MACHINING RESPONSES DURING HARD TURNING OF EN353 STEEL
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 2
Abstract
Estimation, prediction and analysis of responses in turning operation is one of the key research areas. This paper studies the performance of coated inserts (PVD and CVD) in hard machining. In this analysis, 27sets of hard turning experimental trials were performed on a plain turning lathe to study the effect of cutting parameters in influencing the machined surface roughness, material removal rate and power consumption. In all the trials, EN353steel work piece (hardness up to 62 HRC) was machined with commercially available carbide inserts under dry conditions. The machining outcome was used as an input to develop regression models to predict the machined responses on this material. The analysis of this model was used to develop Multi-Objective equation within the specified range of constraints to ascertain the influence of cutting speed, spindle feed and depth of cut to correlate these variables on the stated responses. It was concluded that the multi linear regression model is a choice for prediction of machining responses during machining of EN353 steel (62 HRC) and the results are effective and comparable with Genetic Algorithm (GA) and Artificial Neural Networks (ANN).
Authors and Affiliations
A. V. N. L. SHARMA, G. KRISHNAIAH
Keywords
Related Articles
- EP ID EP222593
- DOI -
- Views 92
- Downloads 0
Thermal and Solutal Buoyancy Effects on Mixing of Opposed Laminar Jets in a Two-Dimensional Passive Mixer at a Higher Reynolds Number
Numerical analysis of two opposing streams of different fluids having different temperatures (same phase, miscible) in a 2-D adiabatic channel, is numerically investigated in the mixed convection laminar flow regime. The...
Experimental Investigation on Properties of Surface Radiation of Solar Collector Receiver Tube Material with Black Nickel Coating
In this study, the characteristics of surface radiation heat transfer properties of stainless steel 304with Black Nickel coating is investigated with and without exposure of sunlight to measure the emissivity (€) and abs...
Prediction of Natural Frequencies of Thick Circular Plates using Finite Element Analysis
This paper presents linear free vibration of thick isotropic circular plates using finite element simulation. The three-dimensional ‘SOLID185’ element of ANSYS is used to calculate the natural frequencies of uniform circ...
Experimental and Numerical Investigation of PV Module for Better Efficiency using Porous Media
Jordan severely lacks enough sources of energy, which causes a decline in its economic level, this is due to the high cost of production of electricity using imported fossil fuels, However, it is found that during operat...
Fabrication Study on the Effect of Double Sprocket Mechanism in Bicycle
The current work introduces a model for fast moving vehicle that approaches to design a cost effective, safe and durable product. This concept would be an innovative product in the market for recreational vehicles in des...