ANALYSIS INTO THE INFLUENCE OF SELECTED TOOTHED GEAR PARAMETERS ON THE VALUE OF SLIPPAGE AND CONTACT STRESSES IN A CYLINDRICAL GEARBOX
Journal Title: Tribologia - Year 2018, Vol 280, Issue 4
Abstract
The paper presents issues concerning the geometrical and durability calculations of power shift gearboxes with multi-criterion optimization, using proprietary computer software. Among many parameters influencing the value of slippage and contact stresses, the flank ratio at P-0 correction and P correction, the value of the flank angle, and the module value were analysed. The slippage was analysed at Point B1, which belongs to the beginning of the single tooth engagement area, as well as in Point B2, where the single tooth engagement area ends. Contact stresses were calculated at Point C, which is the pitch point. Their values were referenced to experimentally determined fatigue contact durability σHlim.<br/><br/>
Authors and Affiliations
Marek MARTYNA, Jan ZWOLAK
Keywords
Related Articles
- EP ID EP414822
- DOI 10.5604/01.3001.0012.7530
- Views 65
- Downloads 0
Badanie zjawiska pseudoplastyczności i tiksotropii smarów litowych z wykorzystaniem spektroskopii ATR-FTIR
THE INFLUENCE OF TANGENTIAL STIFFNESS OF THE CONTACT ON FRICTION FORCE IN THE PRESENCE OF LONGITUDINAL TANGENTIAL VIBRATION
The results of the numerical analysis of the contact tangential stiffness effect on the friction forces runs in the presence of longitudinal tangential contact vibrations are presented in this paper. In addition, the exp...
BADANIA LABORATORYJNE ZUŻYWANIA ELEMENTÓW PRZENOŚNIKÓW TAŚMOWYCH DO MAS FORMIERSKICH
W artykule zaprezentowano wyniki badań dotyczące zużywania się elementów podajnika taśmowego wykonanych z różnych materiałów. Na potrzeby eksperymentu zbudowano stanowisko badawcze, odzwierciedlające rzeczywiste warunki...
THE INFLUENCE OF THE NUMBER OF RESEARCH COURSES ON THE ESTIMATION OF CONTACT FATIGUE LIFE SCATTER OF LUBRICATED ROLLING FRICTION PAIRS
The article presents the research results of value changes of contact fatigue life scatter caused by changes of the number of research courses in the tribological experiment. The presented work is the continuation of the...
MICROSCOPIC TRIBOLOGICAL ANALYSIS OF THE KNEE JOINT
The aim of the conducted research was the evaluation of the topography and the structure of the superficial layer of meniscus and articular cartilage. These are surfaces that optimise the friction and lubrication process...