Analysis of Card controlling System in Conwip, Kanban and Base Stock Control System
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2016, Vol 4, Issue 3
Abstract
Productive production control system is that which produce the right parts, at the right time at a comparable cost. These schemes are often referred to as just–in–time, push or nil inventory. In push system uses card sets to firmly control work-in-process between each two of workstations. Total system work–in-process (WIP) is restricted to the summation of the number of cards in each card set. Production happens at a workstation only if raw material is accessible and the material has a card authorizing production. Each set of push card between workstations authorizes material to be dragged into the upstream workstation for processing and consignment to the downstream workstations. In pull seems to share the advantages of push while being applicable to a wider kind of production environments. A pull system values a lone global set of cards to control total WIP. Material enters the systems only when demand happens and raw material obtains a card authorizing entry, the card authorizes the material to move through the system to complete production. When the products depart the system, the card is issued, permitting the new material to go in the system. In this system, the WIP is not controlled at individual workstation. Conwip control system, Kanban System and base stock control system are the major control systems from push and pull systems. The purpose of this research paper is to investigate and analyze the card controlling system of Conwip system, Kanban System and base stock control system.
Authors and Affiliations
Ravindra Pathak, Dr. Sunil k Somani
Keywords
Related Articles
- EP ID EP21727
- DOI -
- Views 215
- Downloads 4
slugSoft-checkpoint based Checkpointing Algorithm for Mobile Distributed Systems
There are number of issues needs to handle in mobile computing systems like mobility, lack of stable storage on mobile nodes, disconnections, limited battery power and high failure rate of mobile nodes which causes...
Synthesis and Characterization of Glass Fiber Reinforced Nano Composite Cylindrical Pipes Using TiO2 Nano Particles
Polymer matrix reinforced with fibers and Nano fillers are widely used in automotive, marine, and aerospace and construction industries because of their high tensile and compressive strength, low coefficient of thermal...
Survey on Efficient Control Algorithm in Cloud for Cost Elaboration
Cloud computing is a new paradigm for delivering remote computing resources through a network. However, achieving an energy-efficiency control and simultaneously satisfying a performance guarantee have become critical i...
Experimental Investigation of Pervious Concrete
the paper provides technical information on pervious concrete’s application, design methods, mixture proportioning and inspection. The term “pervious concrete” typically describes a near-zero-slump, open-graded material...
New Approach on Hybrid Image Compression
Digital images are used in many applications. Large amount of data is necessary to represent the digital images so the transmission and storage of such images are time-consuming and infeasible. Hence the information in...