Analysis of CNG-Diesel Powered Diesel Engine Combustion, Performance and Exhaust Emission Characteristics
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The present study investigates the performance, combustion and emission characteristics results of a 5.5 kW constant speed diesel engine, which was modified to run with both diesel and CNG fuel (diesel+CNG) under combined mode condition. The experiment was conducted with CR: 19.5:1at maximum power condition (at 1500 rpm and 5.5 kW). The brake thermal efficiency (BTE) of the engine was found lower at all different energy ratio, in comparison to diesel fuel (0% energy ratio). The deteriorations in BTE of the engine was observed at 30%, 46% and 51% of gaseous fuel energy ratio under combined mode operation. The engine powered by CNG-Diesel showed lower CO2 and Smoke. However, it showed higher Carbon monoxide, Hydrocarbon and Nitric oxide emissions as compared to diesel fuel.
Authors and Affiliations
Ashok Kumar, Piyushi Nautiyal, Kamalashish Deb
Keywords
Related Articles
- EP ID EP656980
- DOI 10.24247/ijmperdaug2019133
- Views 104
- Downloads 0
A STUDY ON DIFFERENT CHEMICAL TREATMENTS FOR NATURAL FIBER REINFORCED COMPOSITES
This paper examines the chemical treatments of natural fiber reinforced composites to increase their performance. The natural fibers have the advantages of low density, low cost, and biodegradability or eco-friendly in n...
Design and Analysis of Roller Shafts for Sugar Cane Mills by Using FEA Technique with Different Parameters
The scope of this paper is to analyse the strength and hardness of the sugarcane roller shaft, which has the main contribution in the sugarcane industries. Forged steel is used for making sugarcane roller shaft, in that,...
Evaluation of CI Engine Performance and Emission Fuelled by Diesel-Mosambi Peel Pyro Oil Blended with Copper Oxide Nanoparticles
The day by day increase in the emission of pollutants into the environment coming from road transport and rail way transports, and depletion of natural resources and economic considerations are the main reasons for the d...
Addressing Nox – Smoke Trade off in a Direction Injection Diesel Engine With Fuel Blends of Diethyl Ether and Diesel
In this research work, an experimental investigation was carried out to study the combustion, performance and emission characteristics of a single cylinder water cooled diesel engine, when fueled with blends of diethyl e...
An Effect of Tip Clearance on Aero Performance in Axial Flow Compressors for Aero Gas Turbine Engines
Gas turbine engines have dominated aviation industry, because they are highly efficient and reliable. Axial flow compressor is a critical part which plays a crucial role in efficiently working of an aero gas turbine engi...