ANALYSIS OF CORRELATION AND SPECTRAL CHARACTERISTICS OF FRACTAL COMB-STRUCTURED SIGNALS
Journal Title: Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska - Year 2016, Vol 6, Issue 1
Abstract
The paper presents theoretical and experimental investigations of the spectra of fractal comb-structured signals for different values of their coefficient of generation, as well as analyzes autocorrelation characteristics and phase portraits depending on the coefficient of generation. It is established that signal base increases with increasing fractal order and with decreasing coefficient of generation.
Authors and Affiliations
Ruslan Politanskyi, Andrij Veryga
Keywords
Related Articles
- EP ID EP81436
- DOI -
- Views 118
- Downloads 0
THE INFLUENCE OF SOLAR COLLECTOR APPLICATIONS ON THE ECONOMICS OF DOMESTIC HOT WATER PRODUCTION
One of the principal actions arising from the need for rational energy management, is the increase of renewable energy sources use. Application of solar energy photothermal conversion for domestic hot water preparation i...
SACRIFICIAL CATHODIC PROTECTION OF UNDERGROUND OBJECTS
The present article describes the method of computation of the current density and potential distribution around metallic structures buried in soil with other metallic construction near them. Protection against corrosion...
ANALYSIS OF AN ANTI-PARALLEL MEMRISTOR CIRCUIT
The basic purpose of the present paper is to propose an extended investigation and computer analysis of an anti-parallel memristor circuit with two equivalent memristor elements with different initial values of the state...
USING THE GPU TO DETERMINING THE AREA THE FLAME IN THE VISION DIAGNOSTIC SYSTEM
This paper presents possibility of using GPU to determine the edge of the image pulverized combustion coal. Compared are the operation time and the accuracy of edge detection area of the flame. Used a method based on the...
SUPERVISION OF LABORATORY MEASURING EQUIPMENT BASED ON THE EXAMPLE OF ILLUMINANCE METERS
Laboratory measuring equipment should be subject to supervision. The scope of this supervision depends on the field of the application of the instrument and should include calibration. The correct operation of theinstrum...