Analysis of crack and strain states of high performance reinforced fiber concrete beams
Journal Title: Bulletin of the Military University of Technology - Year 2014, Vol 63, Issue 3
Abstract
The article presents the crack and strain states analysis of the reinforced high performance concrete beams with steel and polypropylene fibre. The beams were bent in the 4-point model. Research was carried out for three different beams with regard to the quantity and the type of reinforcement. The beam B1 was constructed conventionally with steel rods reinforcement. As regards beams B2 and B3, instead of the stirrups and the compressive rods, fibre reinforcement of variable fibre volume percentage was applied. For the analysis, a non-contact system for three-dimensional measurements of strain – ARAMIS was used. The analysis of the behaviour of the beams under static load was based on the measurements of crack and strain.[b]Keywords[/b]: reinforced concrete beams, high performance concrete, steel fibre, polypropylene fibre, ARAMIS system, crack state, strain state
Authors and Affiliations
Tomasz Trzepieciński
Choosing a password breaking strategy with imposed time restrictions
The aim of the article is to present the password breaking methodology in case when an attacker (forensic investigator, court expert, pen tester) has imposed time restrictions. This is a typical situation during many leg...
Evaluation of time change of the Love k2 and k3 numbers using LAGEOS SLR data
In this paper, we present the estimated Love numbers for degree 2 and 3 (k2 and k3). The determination was based on the Satellite Laser Ranging (SLR) data of LAGEOS-1 and LAGEOS-2 satellites obtained within the period of...
Analiza i klasyfikacja bioaerozoli w czasie rzeczywistym w oparciu o właściwości rozpraszania światła
Rozmiar i kształt cząstek biologicznych są ważnymi parametrami pozwalającymi na rozróżnianie pomiędzy różnymi rodzajami cząstek. Przeprowadzone zostały badania aerozoli pochodzenia biologicznego takich jak pyłki roślin,...
Simulation of systems with solar collectors in relation to the raw meteorological data
The article describes an analysis of energetic efficiency of systems with solar-thermal collec-tors used to heat industrial and domestic water. Innovative approach lies in analysis of the instanta-neous value of the flow...
Zastosowanie metody Westergaarda do oceny oddziaływania samolotu Hercules C-130 na nawierzchnie lotniskowe
W artykule przedstawiono oryginalne rozwiązania oraz metodykę postępowania przy obliczaniu nawierzchni sprężystych obciążonych golenią samolotu o układzie kół w systemie tandem. Wykorzystując metodę stanów granicznych no...