Analysis of Direct Current Motors in Dynamic Regimes Using Numerical Techniques
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2017, Vol 41, Issue 41
Abstract
The electromechanical converters and the electric drive systems where they are parts are generally nonlinear systems due to the nonlinear properties of the materials they are built from, as well as the multiple dependencies between their electrical, magnetical and mechanical parameters. However, under certain conditions (e.g. operation on the linear part of the characteristics), some simplifying hypo-theses are accepted, which allow the treatment of systems as linear systems. This simplifies their analysis and solutions could be obtained with acceptable errors. So the electrome-chanical converters and the electric drive systems can be analyzed as linear or nonlinear systems, depending on their properties and on the equations that govern them. Thus, analytical or numerical solving techniques can be used in order to obtain the solution, i.e. the variation in time of some electric, magnetic or mechanic quantities. In this paper a separately excited direct current motor that drives a me-chanical load is analyzed. The transient processes due to startup or sudden change of torque are analyzed both ana-lytically and numerically. Two techniques – namely numeri-cal solving using a Runge-Kutta method and respectively using an equivalent electrical scheme corresponding to the entire driving system – were used. By comparing the ob-tained numerical and analytical results a very good correla-tion between the different solving methods was proved. Thus, this paper offers alternative and viable analysis tech-niques, suitable for the dynamic regimes of the driving sys-tems with direct current motors.
Authors and Affiliations
Ioana-Gabriela Sîrbu, Lucian Mandache
Keywords
Related Articles
- EP ID EP264083
- DOI -
- Views 127
- Downloads 0
SENSORLESS CONTROL OF INTERIOR PERMANENTMAGNET SYNCHRONOUS MOTOR BASED ON EXTENDED KALMAN FILTER
This paper presents a sensorless position control concept for an interior permanent magnet synchronous motor (IPMSM). Conventionally the speed of an IPMSM can be measured conveniently by d.c. tachogenerators, which are n...
Object Oriented Video Retrieval System based on Domain Ontologies
This paper presents a method for video information retrieval considering the frames extracted from the video sources through the segmentation of each key frame, the tracking of the salient objects and the domain on...
QuickField Analysis of a Three-Phase Encapsulated Busbars System
In this paper, we propose an approach for the magnetic and thermal analysis of a three-phase encapsulated busbars system for high currents using QuickField software. This paper proposes a numerical model developed by cou...
Rapid Determination of the Over-Transient Longitudinal Reactance
The paper presents an original method to determine the over-transient reactance by the longitudinal axis of a synchronous generator, starting from the symmetric three-phased sudden short-circuit test, from the dry run an...
Considerations about the Development of Protective Devices on the Increase Safety in Exploitation of the Electric Power Transformers
Installations and devices of the protection, mounted on transformer, are: oil conservator, gas relays, thermo-siphon filters, air filters, safety valves and thermal image (thermo-copy). Here are some contributions to the...