Analysis of Electrical Power Consumption in Container Crane of Container Terminal Surabaya
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 2, Issue 1
Abstract
Container crane electrification is a re-powering process of container cranes from diesel to electricity. In electrification process, it is required an analysis of electrical power consumption that is needed in the operational of container crane. It aims to determine whether the amount of electrical power that is supplied by PLN can be optimally used in the operational of container crane to do loading and unloading activities. To perform the analysis of electrical power consumption, it is required various data and calculations. The required data are container crane specifications and other electrical equipment specifications, the amount of electrical power that is supplied by PLN, also the single line diagram from the electrical system at the port. While, the calculations that is needed to be performed are the calculation of electrical power load in motors and other electrical equipments, the calculation of nominal current and start current, the selection of cable and busbar, and the calculation of wiring diagram junction power. From the calculations that has been done, then the next step is to do the load flow analysis simulation by using software simulation, so an accurate and effective load flow analysis can be obtained to optimize loading and unloading activities at the port. The result of this research, it can be seen that container crane electrification will give advantages in both technical and economical for the company and for the ship, such as accelerate the loading and unloading time of containers and reduce idle time, especially in the operational of diesel generator
Authors and Affiliations
Agoes Achmad Masroeri, Eddy Setyo Koenhardono, Fathia Fauziah Asshanti
Keywords
Related Articles
- EP ID EP247665
- DOI 10.12962/j25481479.v2i1.2623
- Views 201
- Downloads 0
Booster Pump Performance Analysis Towards Rotation Of Impeller For CSD Dredger Type
Dredger are a vessel for lift materials from sub surface to another place above the water surface. Dredger divided into some types such Suction Dredger, Bucket Dredger, Backhoe Dredger, and Water Injection Dredger. Cutte...
Technical Analysis of Influence of Special Treatment on Water Ballast Treatment using Active Carbon on Vessel and Environment
Ballast water exchange is made by a vessel from one port to another port can cause a problem. The ballast water exchange can be harmful microorganisms that shifts will be a predator for the ecosystem of the intended reci...
Effect of Water Fuel Emulsion on Performance and NOx Emissions of Diesel Engine
NOx as one of the exhaust emissions is harmful to human health. Many methods can reduce NOx emissions, one of them is water in fuel emulsion. By using experiment, research has been conducted in surfactant selection. The...
Analysis Of Electric Propulsion Performance On Submersible 60 M With Motor Dc 2x1850 Kw 380 V Using Ohmformer At Voltage 190 Vdc 10260 Ah And Without Using Ohmformer At Voltage 115 Vdc 10260 Ah
Electric propulsion system is ship propulsion system using electric motor to replace performance of main engine. Submersible ships use DC motor as electric propulsion system because DC motor has advantages of speed contr...
Validation of Engine Performance for Tests on Ballast Water Heat Treatment Using Engine Waste Heat
Heat treatment has been considered as a suitable option for treatment of ballast water. Utilizing the waste heat from the diesel engine fresh water and exhaust gases would be an economic option. For recovering the heat f...