ANALYSIS OF ELECTROMAGNETIC PROCESSES IN THE SYSTEM «CYLINDRICAL SOLENOID – MASSIVE CONDUCTOR»
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 1
Abstract
Purpose. Defining the key parameters of the inductor geometry, as a long multi-turn solenoid, that influence on the current amplitude induced excited in a massive conductor with a flat boundary surface. Methodology. Performing a mathematical analysis of the electrodynamic problem solution for an area with variable structure by integrating Maxwell's equation within the given boundary and initial conditions and also physical assumptions simplifying the process of solving but not distorting the result and carrying out an experiment that confirms not only the correctly construction considered but also the acceptability of the chosen assumption the opacity applying of the metal blank for these operating fields frequencies. Results. Functional dependencies of the current induced parameters on the metal surface of the heating object have been obtained, along which numerical estimates of the electrodynamic process have been performed, and key parameters influencing the heating efficiency have been determined. The correctness of the solutions obtained was confirmed experimentally. The final form of the solution function of the physical-mathematical problem was shown to be acceptable for performing further engineering and research calculations. Originality. The functional connection of the measured values of the induced surface current and the parameters of the measuring system is determined, the experimental confirmation of which indicates the satisfactory calculation model of the induction heating system and the entire solution as a whole. Practical value. Based on the calculations performed, working samples of inductive systems for induction heating that meet the specified heating rate and area requirements can be constructed. The obtained analytical expressions were transformed and simplified for their further using for engineering calculations with a minimum error value.
Authors and Affiliations
Yu. V. Batygin, E. A. Chaplygin, O. S. Sabokar, V. A. Strelnikova
Keywords
Related Articles
- EP ID EP485184
- DOI 10.20998/2074-272X.2018.1.08
- Views 81
- Downloads 0
RESEARCH ON TRANSIENTS AND CHOICE OF OPTIMUM PARAMETERS OF SWITCHING ELEMENTS FOR AN ELECTROMAGNETIC VALVE CONTROL FOR COMBUSTION ENGINE EXHAUST SAMPLING
The article introduces a classical-method-based analysis procedure for transients in the control cascade of an electromagnetic valve for combustion engine exhaust sampling. Analytical expressions for currents and voltage...
IMPLEMENTATION APPROACHES DURING SIMULATION OF ENERGY PROCESSES FOR A DYNAMICALLY POSITIONED SHIP
Purpose. Creation of a mathematical model of the ship's power plant (SPP) combined propulsion complexes (CPC) that takes into account the behavior of all objects, including the ship itself, the transfer of power from the...
STATISTICAL OPTIMIZATION OF FREQUENCY REGULATED INDUCTION ELECTRIC DRIVES WITH SCALAR CONTROL
Purpose. Working out of technique of synthesizing statistically optimal controllers of induction electric drives with frequency scalar control operating under stochastic loads. Methodology. It is shown, that one of the w...
ADVANTAGES OF ELECTRICAL HEATING SYSTEMS WITH NIGHT HEAT ACCUMULATION IN UKRAINIAN CONDITIONS
Purpose. To develop electrical heating systems with night heat accumulation and to prove its advantages comparable with others possible variants of heating. Methodology. We have purposed a methodology which is based on t...
COMPARISON OF ADJUSTABLE HIGH-PHASE ORDER INDUCTION MOTORS’ MERITS
Purpose. Development of mathematical models of adjustable electrical drives with high-phase order induction motors for their merits analysis at static and dynamical modes. Methodology. At the mathematical modeling main k...