ANALYSIS OF FRACTURE AND WEAR RESISTANCE OF ZrN COATINGS
Journal Title: Tribologia - Year 2017, Vol 273, Issue 3
Abstract
The article presents the results of mechanical and tribological studies of ZrN coatings that allowed the determination of their hardness, elasticity modulus, and scratch and wear resistance. Tests were carried out for 1, 1.4, and 2 μm thick ZrN coatings deposited on X5CrNi18-10 austenitic steel substrates by PVD technology. Hardness and Young's modulus of coatings, evaluated by nanoindentation, were within the 26–32 GPa, and 330–360 GPa ranges, respectively. Analysis of the adhesion of the coating to the substrate was carried out based on the results of the scratch test. The highest critical load values of LC1 and LC2 were measured for the 1.4 μm thick coating. Tribological tests performed using a ball-on-disc tribotester showed that the wear resistance increases with coating thickness. This was accompanied by a reduction of the coefficient of friction from 0.22 to 0.17.<br/><br/>
Authors and Affiliations
Kinga CHRONOWSKA-PRZYWARA, Marcin KOT
Keywords
Related Articles
- EP ID EP240866
- DOI 10.5604/01.3001.0010.6119
- Views 70
- Downloads 0
EKSPERYMENTALNA WERYFIKACJA MODELU UTRATY TARCIA PŁYNNEGO W HYBRYDOWYM ŁOŻYSKU WZDŁUŻNYM
Jednym ze stosowanych rozwiązań łożyskowania wzdłużnego ciężkich maszyn jest łożyskowanie w hybrydowym ślizgowym łożysku wzdłużnym, złożonym z segmentów wspartych na elementach sprężystych. W trakcie eksploatacji takiego...
THE CORROSION INFLUENCE ON USING OF METAL MATRIX COMPOSITES BRAKE DISCS
In this article an influence of corrosion on tribologial properties of composite material F3S.20S (A359+20%mSiC) mated with material used in production of brake pads (F701) has been studied. In order to define the influe...
ASSESSMENT OF THE IMPACT OF WETTABILITY ON TRIBOLOGICAL PROPERTIES OF TEXTURED SURFACES
Laser surface texturing is currently the most advanced manufacturing technique used to produce microcavities (grooves, dimples, chevrons, and others) on the surface of machine elements, which can be done in a repeated ma...
ASSESSMENT OF TRIBOLOGICAL PROPERTIES OF MOTOR OILS
Results of tribological properties of fresh and used commercial oils were presented in this article. Effects for model samples with antiwear additives were compared. We used Four Ball Apparatus (FBA) and MT-1 machine for...
Samooczyszczające się hydrofobowe systemy tribologiczne
Procesy adhezyjne lub mechanizmy tribologiczne są interesujące z wielu powodów. Biologiczne mechanizmy kontaktowe pomagają w zrozumieniu zasad funkcjonowania wielu technicznych adhezyjnych urządzeń. Zbadanie biologicznyc...