ANALYSIS OF INDICES OF ENERGY EFFICIENCY OF AUTONOMOUS VOLTAGE INVERTERS WITH VARIOUS MODULATION TYPES
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2018, Vol 180, Issue 14
Abstract
In the article an analysis of energy characteristics and indices of electromagnetic compatibility of autonomous inverters of voltage with different types of modulation is given. Modes of single modulation with 120-, 150- and 180-degree control, one-way and two-way pulse-width modulation, as well as re-modulation mode are considered. The comparative analysis of the implemented parameters of the incoming current pulsation, sinusoidality of the output current, and the values of static and dynamic losses in power switches is presented. The data is obtained through simulation simulation, as well as calculation in the specialized program of MelcoSim from the company Mitsubishi. The obtained analytical expressions allow to determine the values of the amplitudes of higher harmonics in the forms of the output voltage and the output current of the autonomous voltage inverter under different algorithms of single modulation. It is established that the classical diagrams of the output voltage of the autonomous inverter voltage at 120- and 180-degree control are valid only for the resistive load and in the case of an RL load will have a distorted form. The dependencies of the output current THD, the THD of the output voltage, as well as the amplitude of the first harmonic of the output voltage on the value of the modulation coefficient are established. With the growth of the re-modulation coefficient, the amplitude of the output voltage increases, but with this there is an increase in the content of higher harmonics with frequencies lower than the frequency of pulse-width modulation. From the considered modulation algorithms in the autonomous voltage inverter, the smallest losses in the keys and the highest output power causes the mode of 180-degree control, and the best quality of the output voltage and current causes the mode of 150-degree control.
Authors and Affiliations
Volodymyr Nerubatskyi, Alexandr Plakhtiy, Vitaliy Kavun, Artem Mashura, Denys Hordiienko, Vladislav Tsybulnyk
Keywords
Related Articles
- EP ID EP533024
- DOI -
- Views 62
- Downloads 0
ANALYSIS OF METHODS OF DIAGNOSING OF THE FUEL EQUIPMENT OF DIESEL ENGINES
The analysis of methods of diagnostics of the fuel equipment of diesel engines. The principle of diagnosis of defined methods that have parameters which are diagnostics of the fuel equipment, as well as disadvantages of...
VERIFICATION OF THE METHOD OF CALCULATION OF EXTRA-PRESSURE COMPRESSED COLUMNS COMPARED WITH THE CONSTRUCTION NORMS OF UKRAINE
In the works published earlier were obtained dependence which allows to obtain the value of the maximum force (the second group of limiting States) depending on the geometric characteristics of eccentrically compressed c...
NUMERICAL INVESTIGATIONS OF DYNAMIC TRANSVERSE FORCES IN CURVES, IN THE ZONES OF RAILS VARIETIES
The purpose of the work is to identify, by numerical methods, the causes of intensive lateral wear of rails and other bounces of the track in curves of small radius. The research has been carried out for the most mass ty...
THE PROSPECT OF THE DEVELOPMENT OF THE ELECTRIC TRACTION SYSTEM OF DC HIGH VOLTAGE
The majority of CIS railways are electrified on DC with a voltage in the contact network of 3 kV. However, such a voltage is not optimal either for power supply devices or for electric rolling stock. It is a compromise s...
MODEL OF FORMATION OF THE RAILWAY SYSTEM IN THE LARGE CITIES ON THE BASIS OF DETERMINING THE DEMAND FOR TRANSPORTATION
The offered approaches to the definition of demand for high-speed rail passenger transportation in large cities, the theoretical bases of realization of the interval concept of modeling of demand for movement are develop...