ANALYSIS OF PERFORMANCE OF THE NEW TYPE OF FOUR EQUAL OF THE INJECTION ONLINE PRESSURE SEALING FIXTURE

Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1

Abstract

Taking the leakage of steel pipe welding neck flanges with raised face as the research object, the structural characteristics of the traditional fixture and new type of four equal fixture were investigated, and the mechanical properties of the traditional fixture and the new type of four equal fixture were analyzed by using the finite element software Abaqus. The results show that, in the case of the same internal uniform pressure applied to the two kinds of flanges, the maximum circumferential tensile stress and the maximum tensile stress of the bolt of the new type of four equal fixture is 42.2% and 42.9% for the traditional fixture, respectively. The new type of four equal fixture is superior to the traditional fixture in both pressure bearing capacity and stress concentration. Therefore, it is of great significance to investigate the mechanical properties and concept design of the new type of four equal fixture for the wide application of pressure sealing technology

Authors and Affiliations

Li Hao rong, Chen Qing, Hu Yi wei, Chen Yu fei

Keywords

Related Articles

PARTICLE SIZE CONTROLLABLE CATIONIC WATERBORNE POLYURETHANE SIZING AGENT

A light blue transparent cationic waterborne polyurethane emulsion was prepared by self – assembled and self-emulsified technology. By changing the ratio of hydrophobic and hydrophilic raw materials, the particle size of...

PRELIMINARY STUDY ON IMMOBILIZATION TECHNOLOGY OF TIO2 PHOTO CATALYST

TiO2 was used as photo catalyst to treat organic effluent firstly. Methyl orange solution was utilized as simulated wastewater for optimizing conditions of the reaction. That is: reaction time as 60min, solution concentr...

STUDY ON EXTRACTION OF FLAVONOIDS FROM FRUIT OF ROSA DAVURICA P ALL BY DIFFERENT METHODS AND ITS ANTIOXIDANT ACTIVITY

Taking the extraction yield of total flavonoids from fruit of Rosa davurica Pall. (FRDP) as index, the optimum extraction technology and in vitro antioxidant properties of flavonoid obtained from various modern extractio...

STUDY ON EXTRACTION OF CORN STRAW AND CORN CELLULOSE AND THE DEGRADATION PERFORMANCE OF REGENERATED FILM

In this paper, corn straw and corn cob are sifted into outer layer and inner layer, respectively. Then, the cellulose was separated by acid and alkali method, dissolved in ionic liquid AmimCl, cellulose film was regenera...

ANALYSIS OF FACTORS AFFECTING PERFORMANCE OF MECHANICAL SEAL’S END-FACE CHARACTERISTICS

Mechanical seals are widely used due to their excellent stability and low leakage rate. As for mechanical seal end-face characteristics and end-face specific pressure have crucial influence on the operating state of mech...

Download PDF file
  • EP ID EP414581
  • DOI 10.26480/icnmim.01.2018.250.253
  • Views 56
  • Downloads 0

How To Cite

Li Hao rong, Chen Qing, Hu Yi wei, Chen Yu fei (2018). ANALYSIS OF PERFORMANCE OF THE NEW TYPE OF FOUR EQUAL OF THE INJECTION ONLINE PRESSURE SEALING FIXTURE. Topics in Chemical & Material Engineering (TCME), 1(1), 250-253. https://europub.co.uk./articles/-A-414581