ANALYSIS OF POWER QUALITY PARAMETERS USING A GRAPHICAL USER INTERFACE
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2010, Vol 34, Issue 34
Abstract
The paper presents the main features of an original program with graphical interface used to process the data obtained from measurements concerning the electric energy from a rectifying substation corresponding to an urban transportation system, using a CA 8352 data acquisition system. The program provides complete information required for the adoption of optimal measures for the quality parameters improving, through compensation and filtering in order to provide the conformity with the EU norms. The program is easy to use owing to the friendly interface, being accessible to an operator with medium knowledge regarding the acquired data gathering and respectively the monitoring of the quality parameters of the electric energy. The main advantage consists in the possibility to perform an advanced interpretation of the data, highly superior to the analysis capacity of an ordinary analyzer and the results can be comparatively studied in order to improve the calculation method and also treating the data acquired from various types of analyzers in an unitary mode. The data processing is made with an accuracy that is highly superior to that provided by the analyzer and it can be adapted to the specific features of the system in the test points owing to its flexibility and to the possibility of improvement.
Authors and Affiliations
Ileana-Diana NICOLAE, Marius VOINEA, Dinut-Lucian POPA, Marian-Stefan NICOLAE
Keywords
Related Articles
- EP ID EP85213
- DOI -
- Views 214
- Downloads 0
Synthesis of the PID Algorithm for Control the Thermal Regime in the 3D Printer
In this paper it is described the automatic system for formation the small pieces from polymer, based on the principle of thermoplastic extrusion and it is proposed the graph – analytical algorithm for identification the...
Dynamic State of Low Power Asynchronous Motors in Direct-on-Line Starting
The research opportunity is explained by the results obtained in modelling and simulation of asynchronous motors, in the purpose of increasing their technical and economic performances when they operate in dynamic states...
Technical Aspects Regarding Electromagnetic Compatibility Compliance of the Electric and Electronic Integrated Systems
The modern world’s needs of electric and electronic devices and systems lead to a continuously electromagnetic interferences growing in ways that were hard to predict few decades ago, a serious reason to consider the ele...
Rotor flux oriented control on the rotor side of the induction motor
In heavy duty drives, in the range of hundreds kW, wound rotor induction motors are widely used. It is the case of cement and minerals industries. Major users make use of tens of such drives, summing hundreds of MW. Due...
BETWEEN THE SOLAR REFRIGERATION AND THE SOLAR PHOTOVOLTAIC
The human consumption of electrical energy became dangerous for the environment and it is necessary to reconsider our resources notably while making appear the part of the renewable one. Recent researches bring us to not...