Analysis of properties of epoxy compositions that operate in contact with water and oil products
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 6
Abstract
<p>We modified epoxy resin-based polymer solutions to increase durability in aggressive environments and to reduce costs. We achieved the objective via filling them with the multifractional mineral frame and modification with zeolite and furfural. We varied a content of furfural, a total content of the mineral frame and a proportion of individual components in the frame. The investigated compositions should work under conditions of influence of mixtures of water with oil products and other agents (in elements of structures for the transport service). We determined properties of compositions after exposure separately in air, in water and in two types of oil.</p><p>We applied an iterative procedure of random scanning of fields of material properties in five coordinates of varying factors in search for optimal compositions. We studied property fields using experimental statistical models obtained in field experiments. ES models serve to implement calculation experiments using the Monte Carlo method.</p><p>We confirmed the possibility for determining the optimal (by the set of criteria) multicomponent polymer compositions for different operating conditions using an iterative procedure of random scanning of property fields.</p>We obtained compositions for repair and protection of structures, which are in contact with water: paste (reduced viscosity composition without sand) and solution (with reduced epoxy resin consumption). We used compositions that ensure the preservation of the required properties of a protective solution after prolonged exposure to mixtures of water with oil products in the complete overhaul of railway crossing flooring
Authors and Affiliations
Anatoliy Gara, Alexander Gara, Svetlana Sukhanova
Keywords
Related Articles
- EP ID EP528280
- DOI 10.15587/1729-4061.2018.150764
- Views 54
- Downloads 0
Impoving energy characteristics of the welding power sources for TIG-AC welding
This paper proposes a circuit solution and a control algorithm for a welding power source for TIG-AC welding with improved energy characteristics. The source is made using a welding transformer and a low-voltage series a...
Development of models and research into tooling for machining centers
<p>We have constructed three-dimensional solid models for tool storage of the disk type (for 14 instruments) and the chain type for 32 tools, mounted onto the side surface of a machine column. We propose a 3D model of th...
Development of a method to determine deformations in the manufacture of a vehicle wheel rim
<p>The desire to anticipate and predict quality of the manufactured products, its compliance with the technical requirements of the customer at the stage of technology design leads to the development of various methods f...
Synthesis of a fractional-order PIλDμ-controller for a closed system of switched reluctance motor control
<p>The relevance of creating high-quality control systems for electric drives with a switched reluctance motor (SRM) was substantiated. Using methods of mathematical modeling, transient characteristics of the process of...
Studying the effect of the combined technology on durability of the shafttype parts
<p>Restoration of shaft parts with extending their service life is an important reserve of development and growth of repair efficiency. Improvement of wear resistance and durability of parts of agricultural machinery is...