Analysis of stress intensity factors obtained with the fem for surface semielliptical cracks in the zones of structural stress concentrators
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 90, Issue 2
Abstract
In the given article the analysis of stress intensity factors (SIF) for semielliptical surface cracks in low-alloy steel using the finite element method was conducted. The results of the distribution of stress intensity factors along the front of the semielliptical surface cracks in the zones of structural stress concentrators are obtained.
Authors and Affiliations
Ivan Pidgurskyi
Keywords
Related Articles
- EP ID EP373075
- DOI 10.33108/visnyk_tntu2018.02.092
- Views 62
- Downloads 0
Modular 3D modeling of ends bilateral grinding process by wheels with conical calibrating sections
The modular 3D model of the process of grinding the ends of circular rotating parts during processing and oriented noncircular grinding wheels with conical sections templating. On the basis of which created new ways of p...
Optimization of the sports ground illuminating devices distribution
Requirements to the sports ground illumination have been analyzed. As the result of the analysis of the latest publications dealing with the optimization of the illumination-technological parameters of the sports grounds...
Phototherapy device with determination of absorbed energy dose
The article deals with comprehensive analysis of the most common design of devices being used for human skin irradiation in phototherapy. The authors determined that their main drawback is the lack of the possibility of...
Method of segmentation of determined cyclic signals for the problems related to their processing and modeling
In this work the method of adaptive segmentation of determined cyclic signals has been developed. The problem of segmentation (breakdown, division of the signal into distinctive segments) of the cyclic determined signal...
Transportation research process bulk material widely universal screw conveyor
Screw transporter has been developed, which consists of the vertical tube-column, to which the horizontal loading branch is fixed rigidly in the upper part being able to revolve, and in the bottom part – the unloading br...